Leistung Motorsports bypass pipes review
#1
Leistung Motorsports bypass pipes review
Just wanted to share with you a new bypass pipe out there I tried out for my 05 CS. It's manufactured by Leistung Motorsports in Colorado. I got it because the design looked superior (it has hangers) and the price is right. It seems that right now they are only selling these things on ebay and that's where I got it. They sent it promptly and I was pleasantly surprised with what I got. Nice pieces! Stainless steel, mandrel bent, nice welds, all the necessary hardware, complete detailed instructions and they even throw in a 12mm swivelling box end wrench for those tought to get at nuts on the cats...that wrench was a lifesaver...I don't think I would have been able to do it without it. Nice touch!
Getting them in was like any of the other pipes out there. Pretty straightforward depending on the amount of rust you've got but the fit is perfect. The hangers are a nice touch too. Fabspeed doesn't have hangers (correct me if I'm wrong) but I think they are totally necessary and really help combat any possibility of it rattling against the transmission cross member. They aren't polished but I don't care about that and actually prefer it...with our smog testing they check under the car and the less obvious the better.
They claim a 15-17hp gain and I think that's about right.
Now the sound. Pretty cool. They sound really good. Almost stock at idle and get louder from there but not at all noisy or do they produce any drone. They actually sound identical to my friend's ride who has the fabspeed pipes. It's a simple design so there really isn't any reason why they should sound different from one brand to another.
This brings me back to why I'm writing about these. They are a good deal and perform as good or better than more expensive pipes from sharkwerks or fabspeed. They're listed on ebay for $465 but I hit the 'make an offer' buton and they gave em to me for $395. That's $200 less than the competition for the same thing in my mind. Makes sense to me.
Oh and did I mention the customer service? They sent me a set and then realized quickly that one of the pipes was wrong. So, before I even received them they sent out another set completely free of charge and refunded a portion of my purchase for my inconvenience. They also kept in touch with me to make sure everything went well and I had no issues. Top notch.
I highly recommend these for all you out there who are on the fence about getting bypass pipes but cringe at the price. I think it's a fair price at $400 and why not help out a new company trying to get into the game. These guys are awesome and their bypass is a great product at the right price. They are apparantly coming out with an exhaust very soon too which looks promising.
I've posted some pics of the units installed. Sorry, not the best pics but I only had my phone, it was cold and after work when i put them in so it's the best I could do![Smilie](https://www.6speedonline.com/forums/images/smilies/smile.gif)
I may put up a youtube video of the sound but honestly it sounds just like other bypasses out there..no surprises.
By the way, I am not affiliated with these guys in any way...I just wanted to put out the word on a good product and a great price. Just super happy with my purchase!
Cheers!
You can check out their website too: wwww.leistungmotorsports.com
![Name: IMG_1690.jpg
Views: 573
Size: 194.5 KB](https://www.6speedonline.com/forums/attachment.php?attachmentid=143026&d=1296798865)
![Name: IMG_1691.jpg
Views: 463
Size: 192.9 KB](https://www.6speedonline.com/forums/attachment.php?attachmentid=143027&d=1296798875)
![Name: IMG_1693.jpg
Views: 420
Size: 205.5 KB](https://www.6speedonline.com/forums/attachment.php?attachmentid=143028&d=1296798883)
![Name: IMG_1697.jpg
Views: 448
Size: 60.2 KB](https://www.6speedonline.com/forums/attachment.php?attachmentid=143030&d=1296798900)
Getting them in was like any of the other pipes out there. Pretty straightforward depending on the amount of rust you've got but the fit is perfect. The hangers are a nice touch too. Fabspeed doesn't have hangers (correct me if I'm wrong) but I think they are totally necessary and really help combat any possibility of it rattling against the transmission cross member. They aren't polished but I don't care about that and actually prefer it...with our smog testing they check under the car and the less obvious the better.
They claim a 15-17hp gain and I think that's about right.
Now the sound. Pretty cool. They sound really good. Almost stock at idle and get louder from there but not at all noisy or do they produce any drone. They actually sound identical to my friend's ride who has the fabspeed pipes. It's a simple design so there really isn't any reason why they should sound different from one brand to another.
This brings me back to why I'm writing about these. They are a good deal and perform as good or better than more expensive pipes from sharkwerks or fabspeed. They're listed on ebay for $465 but I hit the 'make an offer' buton and they gave em to me for $395. That's $200 less than the competition for the same thing in my mind. Makes sense to me.
Oh and did I mention the customer service? They sent me a set and then realized quickly that one of the pipes was wrong. So, before I even received them they sent out another set completely free of charge and refunded a portion of my purchase for my inconvenience. They also kept in touch with me to make sure everything went well and I had no issues. Top notch.
I highly recommend these for all you out there who are on the fence about getting bypass pipes but cringe at the price. I think it's a fair price at $400 and why not help out a new company trying to get into the game. These guys are awesome and their bypass is a great product at the right price. They are apparantly coming out with an exhaust very soon too which looks promising.
I've posted some pics of the units installed. Sorry, not the best pics but I only had my phone, it was cold and after work when i put them in so it's the best I could do
![Smilie](https://www.6speedonline.com/forums/images/smilies/smile.gif)
I may put up a youtube video of the sound but honestly it sounds just like other bypasses out there..no surprises.
By the way, I am not affiliated with these guys in any way...I just wanted to put out the word on a good product and a great price. Just super happy with my purchase!
Cheers!
You can check out their website too: wwww.leistungmotorsports.com
Last edited by quattrotman; 02-03-2011 at 11:51 PM.
#4
Just wanted to share with you a new bypass pipe out there I tried out for my 05 CS. It's manufactured by Leistung Motorsports in Colorado. I got it because the design looked superior (it has hangers) and the price is right. It seems that right now they are only selling these things on ebay and that's where I got it. They sent it promptly and I was pleasantly surprised with what I got. Nice pieces! Stainless steel, mandrel bent, nice welds, all the necessary hardware, complete detailed instructions and they even throw in a 12mm swivelling box end wrench for those tought to get at nuts on the cats...that wrench was a lifesaver...I don't think I would have been able to do it without it. Nice touch!
Getting them in was like any of the other pipes out there. Pretty straightforward depending on the amount of rust you've got but the fit is perfect. The hangers are a nice touch too. Fabspeed doesn't have hangers (correct me if I'm wrong) but I think they are totally necessary and really help combat any possibility of it rattling against the transmission cross member. They aren't polished but I don't care about that and actually prefer it...with our smog testing they check under the car and the less obvious the better.
They claim a 15-17hp gain and I think that's about right.
Now the sound. Pretty cool. They sound really good. Almost stock at idle and get louder from there but not at all noisy or do they produce any drone. They actually sound identical to my friend's ride who has the fabspeed pipes. It's a simple design so there really isn't any reason why they should sound different from one brand to another.
This brings me back to why I'm writing about these. They are a good deal and perform as good or better than more expensive pipes from sharkwerks or fabspeed. They're listed on ebay for $465 but I hit the 'make an offer' buton and they gave em to me for $395. That's $200 less than the competition for the same thing in my mind. Makes sense to me.
Oh and did I mention the customer service? They sent me a set and then realized quickly that one of the pipes was wrong. So, before I even received them they sent out another set completely free of charge and refunded a portion of my purchase for my inconvenience. They also kept in touch with me to make sure everything went well and I had no issues. Top notch.
I highly recommend these for all you out there who are on the fence about getting bypass pipes but cringe at the price. I think it's a fair price at $400 and why not help out a new company trying to get into the game. These guys are awesome and their bypass is a great product at the right price. They are apparantly coming out with an exhaust very soon too which looks promising.
I've posted some pics of the units installed. Sorry, not the best pics but I only had my phone, it was cold and after work when i put them in so it's the best I could do![Smilie](https://www.6speedonline.com/forums/images/smilies/smile.gif)
I may put up a youtube video of the sound but honestly it sounds just like other bypasses out there..no surprises.
By the way, I am not affiliated with these guys in any way...I just wanted to put out the word on a good product and a great price. Just super happy with my purchase!
Cheers!
You can check out their website too: wwww.leistungmotorsports.com
Attachment 143026
Attachment 143027
Attachment 143028
Attachment 143030
Attachment 143031
Getting them in was like any of the other pipes out there. Pretty straightforward depending on the amount of rust you've got but the fit is perfect. The hangers are a nice touch too. Fabspeed doesn't have hangers (correct me if I'm wrong) but I think they are totally necessary and really help combat any possibility of it rattling against the transmission cross member. They aren't polished but I don't care about that and actually prefer it...with our smog testing they check under the car and the less obvious the better.
They claim a 15-17hp gain and I think that's about right.
Now the sound. Pretty cool. They sound really good. Almost stock at idle and get louder from there but not at all noisy or do they produce any drone. They actually sound identical to my friend's ride who has the fabspeed pipes. It's a simple design so there really isn't any reason why they should sound different from one brand to another.
This brings me back to why I'm writing about these. They are a good deal and perform as good or better than more expensive pipes from sharkwerks or fabspeed. They're listed on ebay for $465 but I hit the 'make an offer' buton and they gave em to me for $395. That's $200 less than the competition for the same thing in my mind. Makes sense to me.
Oh and did I mention the customer service? They sent me a set and then realized quickly that one of the pipes was wrong. So, before I even received them they sent out another set completely free of charge and refunded a portion of my purchase for my inconvenience. They also kept in touch with me to make sure everything went well and I had no issues. Top notch.
I highly recommend these for all you out there who are on the fence about getting bypass pipes but cringe at the price. I think it's a fair price at $400 and why not help out a new company trying to get into the game. These guys are awesome and their bypass is a great product at the right price. They are apparantly coming out with an exhaust very soon too which looks promising.
I've posted some pics of the units installed. Sorry, not the best pics but I only had my phone, it was cold and after work when i put them in so it's the best I could do
![Smilie](https://www.6speedonline.com/forums/images/smilies/smile.gif)
I may put up a youtube video of the sound but honestly it sounds just like other bypasses out there..no surprises.
By the way, I am not affiliated with these guys in any way...I just wanted to put out the word on a good product and a great price. Just super happy with my purchase!
Cheers!
You can check out their website too: wwww.leistungmotorsports.com
Attachment 143026
Attachment 143027
Attachment 143028
Attachment 143030
Attachment 143031
#5
Quattro - They are actually going to be fabbing me up a set. I spoke with Rob earlier this week and they dont have a template for the Turbo S yet, but should have a set within the next couple of weeks. I was told they had some stock cats on they way to use as templates. I'll be sure and document my impressions once I receive my set.
Thanks for your write up - It sealed the deal for me!
Thanks for your write up - It sealed the deal for me!
#6
Quattro - They are actually going to be fabbing me up a set. I spoke with Rob earlier this week and they dont have a template for the Turbo S yet, but should have a set within the next couple of weeks. I was told they had some stock cats on they way to use as templates. I'll be sure and document my impressions once I receive my set.
Thanks for your write up - It sealed the deal for me!
Thanks for your write up - It sealed the deal for me!
#7
Trending Topics
#8
I will if I ever get a minute but like I said in the write up, the difference between mine and my friend's with a fabspeed pipes is not discernible. If you've heard those, you've heard these. Actually, now that I think of it there are sound clips on the website: http://leistungmotorsports.com/porsc.../2ndary-bypass
Last edited by quattrotman; 02-10-2011 at 12:29 PM.
#10
![Smilie](https://www.6speedonline.com/forums/images/smilies/smile.gif)
#14
Quattro - They are actually going to be fabbing me up a set. I spoke with Rob earlier this week and they dont have a template for the Turbo S yet, but should have a set within the next couple of weeks. I was told they had some stock cats on they way to use as templates. I'll be sure and document my impressions once I receive my set.
Thanks for your write up - It sealed the deal for me!
Thanks for your write up - It sealed the deal for me!
#15
This is actually pretty neat and good to hear. We only make ours specifically for the Turbo (there are differences) and so for the Cayenne S' guys I'll be sure to send them their way....
Here's ours for the Turbo and Turbo S:
http://www.sharkwerks.com/products.php?pid=270
Here's ours for the Turbo and Turbo S:
http://www.sharkwerks.com/products.php?pid=270