colorinc & budman take DIY pe 650 for maiden voyage
#1
colorinc & budman take DIY pe 650 for maiden voyage
so we put our 50/60 break in miles on the new set up no oil leaks all the guages seem to be looking good switch on the boost controller and start adding boost WOW get the high boost set 1.25 bar this thing pulls so hard!! its crazy i would like to say thank you to todd k for your help and knowledge i think we have a c6 z06 killer
here is a list of all the things we did
protomotive k24/18g turbos
protomotive ecu tune
gt2 intercoolers
denso double platinum plugs
greddy profec b spec 2 boost controller
5 bar fuel pressure regulator
v-flow intake
evoms dv's
torco mach series accelerator
thats all for now
tim
here is a list of all the things we did
protomotive k24/18g turbos
protomotive ecu tune
gt2 intercoolers
denso double platinum plugs
greddy profec b spec 2 boost controller
5 bar fuel pressure regulator
v-flow intake
evoms dv's
torco mach series accelerator
thats all for now
tim
#3
This thing pulls hard! I can't believe it even runs much less how good it runs. Remember we did this in Tim's garage without a lift and we are not mechanics. Incredible.
Now we just need to do some testing against the RED BEAST I think it is going to be closer than I will like!
Now we just need to do some testing against the RED BEAST I think it is going to be closer than I will like!
#5
Get a AFR guage on that baby... that way you always know what your doing.. especially when you have a boost controller.
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#6
Would love to see the results of that comparo.
On the 1-10 scale, how difficult was the install (10 being hardest)?
On the 1-10 scale, how difficult was the install (10 being hardest)?
This thing pulls hard! I can't believe it even runs much less how good it runs. Remember we did this in Tim's garage without a lift and we are not mechanics. Incredible.
Now we just need to do some testing against the RED BEAST I think it is going to be closer than I will like!
Now we just need to do some testing against the RED BEAST I think it is going to be closer than I will like!
#7
Actually wasn't that bad probably a 5? We had some help installing the FPR and boost controller the rest was pretty easy.
Trending Topics
#9
so we put our 50/60 break in miles on the new set up no oil leaks all the guages seem to be looking good switch on the boost controller and start adding boost WOW get the high boost set 1.25 bar this thing pulls so hard!! its crazy i would like to say thank you to todd k for your help and knowledge i think we have a c6 z06 killer
here is a list of all the things we did
protomotive k24/18g turbos
protomotive ecu tune
gt2 intercoolers
denso double platinum plugs
greddy profec b spec 2 boost controller
5 bar fuel pressure regulator
v-flow intake
evoms dv's
torco mach series accelerator
thats all for now
tim
here is a list of all the things we did
protomotive k24/18g turbos
protomotive ecu tune
gt2 intercoolers
denso double platinum plugs
greddy profec b spec 2 boost controller
5 bar fuel pressure regulator
v-flow intake
evoms dv's
torco mach series accelerator
thats all for now
tim
#12
tim
#13
tim
#14
i am running the stock clutch and no problem from the research i have done the stock clutch should be ok upto 600 bhp as long as you not launching it hard all the time. at high boost i am using 93 oct with the torco mach accelerator race gas concentrate i also did a ton of research on that product and its working perfectly
tim
#15
Run that by Todd- I do not think he will like that. I personally would not with additives. don't you have 100 or 103 octane?
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL