REJEX is awesome...
#16
It is probably a build up caused by previous wax. Did you stip the car of wax with heavy-duty paintwork cleanser and a clay bar? I had the same problem on my turbo because the dealership used Zymol prior to RejEx. I never had the streaking problem on my Seal Grey because I was the only one that touched the car.
#22
GreyGhost
I was so impressed by the photo of your car that I ordered went directly to the RejeX website and ordered some. Question - The info on the RejeX website says not to wax Over RejeX but says that you can put on RejeX Over wax. That doesn't make sense to me. Should I be removing the old wax using cleaner and a clay bar?
I was so impressed by the photo of your car that I ordered went directly to the RejeX website and ordered some. Question - The info on the RejeX website says not to wax Over RejeX but says that you can put on RejeX Over wax. That doesn't make sense to me. Should I be removing the old wax using cleaner and a clay bar?
#25
I just ordered some Rejex purely because of the good reports i've read on this site. I've just bought a clay bar & waxes before i decided to get Rejex, is it a good idea to wax & polish before applying it?
Thanks.
Thanks.
#26
Do any of you Rejex guys have first hand experience with the Klasse duo? If so, I would be curious to hear any comparisons of application and result.
Thanks!
Thanks!
Last edited by Ray M; 05-23-2004 at 10:30 PM.
#27
Originally posted by Itzkirb
Just wash with Dawn, Clay bar if you like, wash again and then apply a coat of Rejex, wait 12hrs and then drive.
Just wash with Dawn, Clay bar if you like, wash again and then apply a coat of Rejex, wait 12hrs and then drive.
#28
You can put RejeX over the wax, but if you're going to clay bar your car I would just use Rejex. Waxing is another step and you probably won't notice a difference if you waxed it or not after a coat of RejeX is on. Plus, I Think, rejex lasts a little bit longer if it not appplied over a coat of wax.