Is anyone making 700 crank HP on pump gas?
#2
I do at .8 bars but I don't think that counts LOL
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#7
Wow this is eye opening. I was always under the impression that most of these kits made 700 HP on pump.
Trending Topics
#9
i haven't seen dyno's of the hitachi maf gt700s, but w/ the stock maf, peak HP was not much different between race & gas (peak torque and area under the curve are a different story.)
my butt dyno says 91 w/ the hitachi is just as fast as race w/ the stock maf. (obviously, my butt is not the world's most accurate measuring device so take this with a grain of salt)
- chuck
my butt dyno says 91 w/ the hitachi is just as fast as race w/ the stock maf. (obviously, my butt is not the world's most accurate measuring device so take this with a grain of salt)
- chuck
#10
I agree with Jags above. (700 on Pump is rare)
This is beyond a RUF RT12 (650), and is only found in some 9FF kits,
Protomotive with full build and GT30's as a minimum (or K24/20G, which this is only one),
and obviously all of the Proto GT35 builds make more power than that.
EVOMS GT850 + should also do this.
MK (me no likey pump gas, anyway)
This is beyond a RUF RT12 (650), and is only found in some 9FF kits,
Protomotive with full build and GT30's as a minimum (or K24/20G, which this is only one),
and obviously all of the Proto GT35 builds make more power than that.
EVOMS GT850 + should also do this.
MK (me no likey pump gas, anyway)
#11
I dont think a regular gt700 will make 700 crank hp on PUMP. I could be wrong. If I am lets see a dyno to show otherwise. Im making more than 700 crank hp on pump, but Im not a regular gt700
#13
Under my old set up (minus fuel system, evo v-flow and w/ my cats) I dynoed 580 on pump.
I bet now, at 1.2 bars (the max I will run on pump, 93) I am making close to 700 (maybe 670-680) at the crank.
I bet now, at 1.2 bars (the max I will run on pump, 93) I am making close to 700 (maybe 670-680) at the crank.
Last edited by Dr_jitsu; 01-11-2008 at 02:33 PM.
#15
EVO just dyno'd my car yesterday b/c they updated the hitachi maf software. It did 600awhp on pump and 640awhp on race file. I asked them for a copy of the dyno and I will post it as soon as I get it!