Looking for pics of matte black turbo twists on a silver car
#16
I dont know, I bought these from IllM3 (Martin). But usually about 75-100 a wheel at most places. I think the stock wheels have to be sand blasted to get the paint off first, so could be more.
I'll know soon though because the ones I'm getting from Mikelly are goind straight to powdercoating.
I'll know soon though because the ones I'm getting from Mikelly are goind straight to powdercoating.
Looks good on your car, you hyped for VIR, wait I know you are haha!
#19
They were sandblasted and then powdercoated and finished with a gunmetal grey with a gloss finish.
The colour is very very similar to the BMW colour 'Sparkling Graphite'
http://www.bmw-e87.com/AW/040.jpg
Hope you get the finish you are after, its amazing the difference it makes to the look of the car!
Lee
#23
As for the wing, it's a GT2 decklid/CF blade from EVOMS. It looks quite different now (and our Turbo has remained STOCK).
#24
NineNineSix had all black wheels. They're on my car now posted earlier in the thread.
#28
When running stock wheels, consider putting on some 15mm spacers all around. Totally fills out the fenders.
If you roll the rears I am almost positive you can run 23mm spacers. Rolling the fenders opens up a lot room.
If you roll the rears I am almost positive you can run 23mm spacers. Rolling the fenders opens up a lot room.
Last edited by Turbo Fanatic; 05-13-2008 at 08:13 PM.