Anonymous Protomotive 996TT vs C6 Z06 (stock)
#1
06-16-2008 | 07:51 PM
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,510
From: Virginia, USA
Rep Power: 788
Anonymous Protomotive 996TT vs C6 Z06 (stock)
#3
06-16-2008 | 08:09 PM
Registered User
Joined: Oct 2006
Posts: 1,423
From: Incline Village, NV
Rep Power: 198
Good video Scott. FYI, I ran my previous Proto GT2, pump gas to pump gas, from a 40 roll a few times the other weekend and we were just about dead even to about 130 (he had about a fender) then I would start pulling a car length to top of 4th. Both cars made mid 500's whp and weigh about the same, so outcome was as expected.
#4
06-16-2008 | 08:15 PM
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,510
From: Virginia, USA
Rep Power: 788
Good video Scott. FYI, I ran my previous Proto GT2, pump gas to pump gas, from a 40 roll a few times the other weekend and we were just about dead even to about 130 (he had about a fender) then I would start pulling a car length to top of 4th. Both cars made mid 500's whp and weigh about the same, so outcome was as expected.
My TT is making close to 700 rwhp on pump but weighs around 100 lbs more than the Z06 does, so I think they run right where they should as well.
#7
06-16-2008 | 08:39 PM
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,510
From: Virginia, USA
Rep Power: 788
I was on low boost. On high boost...it's MUCH, MUCH worse.
But ya...the Z06 is very quick.
Last edited by Divexxtreme; 06-16-2008 at 08:45 PM.
Trending Topics
#8
06-16-2008 | 08:45 PM
Registered User
Joined: Sep 2007
Posts: 937
From: Quincy, IL
Rep Power: 69
I saw that on the video, but I still think the z did very well. I would love to see how the Porsche runs away on c16...that would be fun to watch!!
#10
06-16-2008 | 08:59 PM
Registered User
Joined: Jul 2006
Posts: 8,934
From: ga
Rep Power: 551
So it makes 700 whp on low boost?
It will take a S/C/Turbo/454 to keep up with your car in a Z06.
On low boost.
#12
06-16-2008 | 10:05 PM
Registered User
Joined: Oct 2007
Posts: 224
From: Fort Lauderdale Florida
Rep Power: 67
Looks about right.
My 997TT
At 1.25 bar with my setup on 103 my car puts down 700 awhp done by Protomotive.
Heres a run against a bone stock ZO6 from 45. ZO6 lets off at 160.
http://www.youtube.com/watch?v=PRvrOMgau4k
By the way Scott, did you ever have a chance to run the car at the track to see if how your 35s compare to the 3076s?
My 997TT
At 1.25 bar with my setup on 103 my car puts down 700 awhp done by Protomotive.
Heres a run against a bone stock ZO6 from 45. ZO6 lets off at 160.
http://www.youtube.com/watch?v=PRvrOMgau4k
By the way Scott, did you ever have a chance to run the car at the track to see if how your 35s compare to the 3076s?
#14
06-16-2008 | 10:19 PM
Registered User
Joined: Apr 2006
Posts: 131
From: colorado
Rep Power: 24
Looks about right.
My 997TT
At 1.25 bar with my setup on 103 my car puts down 700 awhp done by Protomotive.
Heres a run against a bone stock ZO6 from 45. ZO6 lets off at 160.
http://www.youtube.com/watch?v=PRvrOMgau4k
By the way Scott, did you ever have a chance to run the car at the track to see if how your 35s compare to the 3076s?
My 997TT
At 1.25 bar with my setup on 103 my car puts down 700 awhp done by Protomotive.
Heres a run against a bone stock ZO6 from 45. ZO6 lets off at 160.
http://www.youtube.com/watch?v=PRvrOMgau4k
By the way Scott, did you ever have a chance to run the car at the track to see if how your 35s compare to the 3076s?
#15
06-16-2008 | 10:40 PM
Registered User
Joined: Jun 2006
Posts: 1,482
From: Kansas City
Rep Power: 121
I know how fast the ZO6s are. Your 997tt is extreemly impressive. Are you running a 5 bar in your fuel system?
I thought 700 flywheel was about the safe limit for our stock rods. Aren't you concerned about your engine going KABLOOOOIE ?
Awesome setup though!
I thought 700 flywheel was about the safe limit for our stock rods. Aren't you concerned about your engine going KABLOOOOIE ?
Awesome setup though!