Different turbos-pros and cons
#16
I'm not interested in doing engine internals. I have a UMW 1 bar flash, and DV's. I'm looking for an exhaust and have heard so many blown MAF stories that I'm confused about air filters and intakes. I bought a BMC washable air filter and never installed it.
#18
you have k-16's get them converted to hybrids, get the proper tuning and exhaust and call it a day and dont drive yourself crazy. PERIOD. (of course my 2 cents)
above is best bang for buck and car will be unbelievable. I have driven cars with that set up compared to stock and X-50's, and really it is all you need.
above is best bang for buck and car will be unbelievable. I have driven cars with that set up compared to stock and X-50's, and really it is all you need.
#19
You should buy my UMW Stage 2 hybrids w/wastegates, more power than this for the track is a waste IMO
Christian
Christian
#20
No internals means no huge injectors, you are limited to around 600hp max. if no internals then you have to say "I AM ON A BUDGET" because when you go much north of 500whp/wtq you tend to blow lots of money on parts you WILL BREAK and a budget means just what TK said above. do some 16G's + exhaust, you did the DV's, stronger clutch, re-tune (again), PSS9's and fuggetaboutit. that's $11K down the tubes before you get into what it's going to cost you when you regularly begin breaking parts (and you join the "forbidden" 600-700WHP club) Don't worry about the intake at this point. Not really critical at this level of output. You will blow MAF's, though, with lots of different free-flowing intake systems and again, this screams "I don't want to get buried in repairs of $250.00 or more" so seriously evaluate what the goal is here. MAF's are cheap.
For the GT700 with internals and related suspension goodies to keep it glued down, that's $50K in mods (vs $10K) and another $15-20K in annual maintenance vs. an almost stocker-factory maintenance schedule.
As previously mentioned, "These cars eat $5K bills like a small, angry (but hungry) child at a Hostess factory."
Enjoy your ride.
SY
For the GT700 with internals and related suspension goodies to keep it glued down, that's $50K in mods (vs $10K) and another $15-20K in annual maintenance vs. an almost stocker-factory maintenance schedule.
As previously mentioned, "These cars eat $5K bills like a small, angry (but hungry) child at a Hostess factory."
Enjoy your ride.
SY
Last edited by SpeedYellow; 07-11-2008 at 10:06 AM.
#21
Actually, it's a bit less than that (for me at least). I've got less than $6k into my build and that includes K16/16g turbos w/ upgraded wastegate actuators, all new turbo gaskets and hardware, 5 bar fpr, DGI Exhaust, Custom clutchmasters clutch, EPL custom dyno tune, and install for ALL of the foregoing. I don't have a suspension yet though.
Last edited by Seal Grey Matte; 07-11-2008 at 11:59 AM.
#22
I AGREE!!! what ive seen is this moddin can spiral out of control always wanting MORE MORE MORE MORE !!! get a nice bump in power and call it a day.
take it from me....look at my sig....been there!
Thread
Thread Starter
Forum
Replies
Last Post
I-Man
996 Turbo / GT2
13
09-17-2015 05:31 AM