Thanks 911tuning aka Markski!
#47
So update time but nothing to brag about at all its stupid cold here today well at 7am LOL. Its actually 31 outside With is -4 here in Canada BTW. put the C16 in and set the pressure to 20psi after a few WOT passes to heat up the tires found the car popping at 1.5 bar i know the engine wasnt warm eneough and the tires are slipping like crazy but i gave it a shot.
1 ran 3 60-130 first was a major tire spin adventure and ran a 6.6 2 more tries but the same issue car went squirmy and then settled in but it was already to late both runs 6.3 and a 6.27 TRACTION issues!
I am going to wait and see if the Sun pops out and heats up the road a bit more and give it a few more attempts, But i think the car is not running to its 100% potential its to cold and its leaning out and i am not going to chance it just to make a number.
But the car does rip and is a hand full.
I also have some audio clips of the exhaust that sounds so GOOD!
1 ran 3 60-130 first was a major tire spin adventure and ran a 6.6 2 more tries but the same issue car went squirmy and then settled in but it was already to late both runs 6.3 and a 6.27 TRACTION issues!
I am going to wait and see if the Sun pops out and heats up the road a bit more and give it a few more attempts, But i think the car is not running to its 100% potential its to cold and its leaning out and i am not going to chance it just to make a number.
But the car does rip and is a hand full.
I also have some audio clips of the exhaust that sounds so GOOD!
#48
Now you know what I have been up too lol
thanks
mark
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#50
Great Job Mark , glad to see all your hard work pay off after one year..
#51
Thanks guys.... Sean, you better stop cause Ill show up and make your GT3076rs look like K16s next to mine LOL J/K
The kit addresses all the components not just a big turbo running 1.7 bar but no proper air flow nor cooling... thats easy... this is figured out to the T... I even made custom CnC parts to make the install easy and fast... something Sean can allude to if he wishes to share how much extra he spent in making his gt3076rs fit he he ( you should have listened)... The point is I take care of that on my end so you the customer does not have to get stuck with an extra $2K bill.... for example... this is my hanging backplate... custom made to fit stock hangers for the turbo... just one of few well thought out ideas...
Or this custom single header flange with a step down inside so that the the header tube drops in and we weld it inside and out...
Or this stock replacement intercooler is in the works... it will fit stock hoses... no restrictions like in other Chinese made endtanks.... we make them in house as well...
all in good time my friends... I have been quiet but something big is cooking
The kit addresses all the components not just a big turbo running 1.7 bar but no proper air flow nor cooling... thats easy... this is figured out to the T... I even made custom CnC parts to make the install easy and fast... something Sean can allude to if he wishes to share how much extra he spent in making his gt3076rs fit he he ( you should have listened)... The point is I take care of that on my end so you the customer does not have to get stuck with an extra $2K bill.... for example... this is my hanging backplate... custom made to fit stock hangers for the turbo... just one of few well thought out ideas...
Or this custom single header flange with a step down inside so that the the header tube drops in and we weld it inside and out...
Or this stock replacement intercooler is in the works... it will fit stock hoses... no restrictions like in other Chinese made endtanks.... we make them in house as well...
all in good time my friends... I have been quiet but something big is cooking
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#53
and you are correct there is no hook up at all on the street right now imagine if i brake boosted LOL
#54
Congrats to Paleet and Marski
Robert
#57
mark
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#59
Thanks Rob, I have to say i do love the exhaust sound it has a really good note to it.
I have sound clips but i am having trouble uploading the freaking things!
#60
Nope not my car...
Yea i wish i had all the repairs done before the weather went to the crapers!
Friken Rad took 3 weeks!
The car charges like crazy up top i have the boost controllers set with the gain down to 5 so i don't break loose but as soon as it hits 3600 that's its i spin and spin..
I hope its a mild Winter so i can still test!