Chris (Powell): Post your build out!
#2
https://www.6speedonline.com/forums/...-released.html
You haven't seen this thread ? 96lb injectors are nothing new, nor do they suggest anything more than he's leaving some room on the table for safety which will aid when the limits start getting pushed.
You haven't seen this thread ? 96lb injectors are nothing new, nor do they suggest anything more than he's leaving some room on the table for safety which will aid when the limits start getting pushed.
#4
Thanks for that mental image. I have to go puke now.
#5
Damn I'm going through my pictures on this computer and the only ones I have on it are in that thread, but basically this how the build out goes. I will have detailed pictures when I get the car back. Until then I'll try to post up some pics of what I have so far. I didn't have my camera out much when I was at Boost Logic.
Boost Logic custom built headers that have been coated. They have a pair of TiAL 44mm Wastegates attached.
PT Billet 5857's w/o the E-Cover on (it will have a standard 3" Inlet)
Boost Logic custom 6" Core Intercoolers
The rest of the pics are from my iPhone so I'll wait till I get actual photos of the parts.
Fuel system basically consists of:
Boost Logic custom built Surge Tank (Fed by the stock fuel pump)
2x Bosch 044 Pumps w/ Aeromotive Fuel Filters
-6an lines that feed each fuel rail
5bar Regulator (may be replaced with an adjustable regulator)
96lb Injectors from EPL
All of my intake system has be redone. This include the Y-Pipe, the pipes to the intercoolers, and the pipes that go above the intercoolers for my air filters Also connected to the Y-Pipe is a pair of Tial 50mm Blow Off Valves.
The clutch setup consists of a Tilton Triple Carbon Clutch w/ GT2 Acum. Delete, and a few other pieces.
I've also lowered the car with a set of H&R Coil Overs. Yeah I know it's not go fast parts, but at least I will not be monster trucking anymore.
The tuning will be done by Tony @ EPL w/ Justin Nenni (hope I spelld that right) from Tuning Concepts doing the data logging and real time explanation to Tony what he's actually seeing the car do. I'm really no help when I try to explain something to Tony because the DME is a clever SOB and I still haven't figured it out yet.
My last 2 mods were for the mile, but I now have GT3 Seats for RoTEC and a Techquipment Roll bar w/o the Cross brace.
When I left Austin this is how the car looked. It just really needed the bumper put back on. You can see all the hardpiping, BOVs, etc. Sorry about the size of the picture!!
Boost Logic custom built headers that have been coated. They have a pair of TiAL 44mm Wastegates attached.
PT Billet 5857's w/o the E-Cover on (it will have a standard 3" Inlet)
Boost Logic custom 6" Core Intercoolers
The rest of the pics are from my iPhone so I'll wait till I get actual photos of the parts.
Fuel system basically consists of:
Boost Logic custom built Surge Tank (Fed by the stock fuel pump)
2x Bosch 044 Pumps w/ Aeromotive Fuel Filters
-6an lines that feed each fuel rail
5bar Regulator (may be replaced with an adjustable regulator)
96lb Injectors from EPL
All of my intake system has be redone. This include the Y-Pipe, the pipes to the intercoolers, and the pipes that go above the intercoolers for my air filters Also connected to the Y-Pipe is a pair of Tial 50mm Blow Off Valves.
The clutch setup consists of a Tilton Triple Carbon Clutch w/ GT2 Acum. Delete, and a few other pieces.
I've also lowered the car with a set of H&R Coil Overs. Yeah I know it's not go fast parts, but at least I will not be monster trucking anymore.
The tuning will be done by Tony @ EPL w/ Justin Nenni (hope I spelld that right) from Tuning Concepts doing the data logging and real time explanation to Tony what he's actually seeing the car do. I'm really no help when I try to explain something to Tony because the DME is a clever SOB and I still haven't figured it out yet.
My last 2 mods were for the mile, but I now have GT3 Seats for RoTEC and a Techquipment Roll bar w/o the Cross brace.
When I left Austin this is how the car looked. It just really needed the bumper put back on. You can see all the hardpiping, BOVs, etc. Sorry about the size of the picture!!
#7
Trending Topics
#12
#13
Cleaning the sand out of his Magina.Attachment 107903
Eric, how is it going, Bro.
I was working my crazy *** off, plus something real bad happened to wifey so I had to spend some time w/ the family (not that I mend, lol).
I just realized, DOH, if I want to ever do the mile I need to install a roll cage. I hear its a $100 fine on the spot if you break 190 w/ out one.
#14
I saw an episode of "Trucks TV" where they bought a pickup and found out that the roll hoops were made out of PVC pipe wrapped in electrical tape. How close is the scrutineering at the mile?
#15
https://www.6speedonline.com/forums/...-released.html
You haven't seen this thread ? 96lb injectors are nothing new, nor do they suggest anything more than he's leaving some room on the table for safety which will aid when the limits start getting pushed.
You haven't seen this thread ? 96lb injectors are nothing new, nor do they suggest anything more than he's leaving some room on the table for safety which will aid when the limits start getting pushed.
just wondering what kind of fuel pump is being run with those injectors? I would assume that those injectors are only being used on the ultra high HP setup.