996 Turbo / GT2 Turbo discussion on previous model 2000-2005 Porsche 911 Twin Turbo and 911 GT2.

Preliminary Dyno Numbers K24/20g's

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 10-22-2009 | 06:02 PM
bmoores's Avatar
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 3,574
From: Houston/Manchester
Rep Power: 330
bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !
Preliminary Dyno Numbers K24/20g's

Well we had a little trouble on the dyno this evening with wheelspin. 4th gear pulls. We tightened the car down a few times but just couldn't get it to put all the power down without wheelspin. 625hp/575tq going to redyno tomorrow or Saturday with DR's on to see if they'll stick any better. Temp was 76 degrees with 40% humidity for anyone that cares on a Dyno Jet Dyno. Fans on IC's and on front radiator. Boost was @ 1.42 bar. Happy with the numbers considering everything but i think there is a little more in it.
 
  #2  
Old 10-22-2009 | 06:07 PM
Divexxtreme's Avatar
Registered User
Joined: Jun 2005
Posts: 8,510
From: Virginia, USA
Rep Power: 788
Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !Divexxtreme Is a GOD !
Very nice, Ben. But yes, she has more than that in her.
 
  #3  
Old 10-22-2009 | 06:09 PM
bmoores's Avatar
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 3,574
From: Houston/Manchester
Rep Power: 330
bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !
Originally Posted by Divexxtreme
Very nice, Ben. But yes, she has more than that in her.

I'm not sandbagging I promise Scott. I'll report back when we have drama free numbers.
 
  #4  
Old 10-22-2009 | 06:36 PM
MBailey's Avatar
Registered User
Joined: Jul 2003
Posts: 2,957
From: Texas
Rep Power: 455
MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !
Ben,
I bet she has at least 25 more torque if not 50. It depends where it was slipping but hp may not change much since its at high rpm where its less likely to be spinning. Speculation aside it will be interesting to see the result with the DRs.
 

Last edited by MBailey; 10-22-2009 at 06:38 PM.
  #5  
Old 10-22-2009 | 06:38 PM
Red 9's Avatar
Registered User
Joined: Dec 2005
Posts: 567
From: Oceania
Rep Power: 62
Red 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond reputeRed 9 has a reputation beyond repute
Originally Posted by bmoores
Well we had a little trouble on the dyno this evening with wheelspin. 4th gear pulls. We tightened the car down a few times but just couldn't get it to put all the power down without wheelspin. .
I think this is a big issue once serious power is being made.It is one reason I am sceptical about so many numbers seen.
 
  #6  
Old 10-22-2009 | 06:38 PM
bmoores's Avatar
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 3,574
From: Houston/Manchester
Rep Power: 330
bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !
I'd agree Mike I'd say about 25hp and 50-16tq still on the table. But who knows? It is what it is. Car goes like stink. We'll see what Todd K. thinks after we get a good dyno and see how to proceed with getting more power safely.
 
  #7  
Old 10-22-2009 | 06:42 PM
MBailey's Avatar
Registered User
Joined: Jul 2003
Posts: 2,957
From: Texas
Rep Power: 455
MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !MBailey Is a GOD !
Originally Posted by bmoores
I'd agree Mike I'd say about 25hp and 50-16tq still on the table. But who knows? It is what it is. Car goes like stink. We'll see what Todd K. thinks after we get a good dyno and see how to proceed with getting more power safely.
Hey Ben, if you can pick your time try early fri or sat. Air should be cool and dense like it was at the mile.
 
  #8  
Old 10-22-2009 | 07:06 PM
topgun's Avatar
Registered User
Joined: Jun 2006
Posts: 1,596
From: NY
Rep Power: 330
topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !topgun Is a GOD !
Dyno numbers don't mean much...u went 200....that counts more than the dyno numbers. Your car rips
 
  #9  
Old 10-22-2009 | 07:25 PM
BlownVette's Avatar
Registered User
Joined: May 2008
Posts: 74
From: H-Town
Rep Power: 21
BlownVette has a spectacular aura aboutBlownVette has a spectacular aura aboutBlownVette has a spectacular aura about
Not sure if you are dynoing in RWD or AWD, but if you put someone (x1 or x2) in the back seat it might help to get some weight over the rear axle to help with the wheel slip.

Also, when I had twin-side-mounted intercoolers I used to use two high-speed-electric leaf blowers directed at the intercoolers to better replicate actual driving conditions and get air flow across the intercoolers. Regular type fans, even the squirrel cage designs, don't seem to get the job done.
 
  #10  
Old 10-22-2009 | 07:28 PM
Dr_jitsu's Avatar
Registered User
Joined: Nov 2006
Posts: 8,083
From: Texas
Rep Power: 671
Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !Dr_jitsu Is a GOD !
Originally Posted by bmoores
I'm not sandbagging I promise Scott. I'll report back when we have drama free numbers.

This is 6speed, nothing is drama free

As mentioned, you did 200 and will break 6 seconds in the 60-130 that is what really matters, however you should be close to 700 on C 16 and 1.5 bars.
 
  #11  
Old 10-22-2009 | 07:43 PM
Swole Powell's Avatar
Registered User
Joined: Dec 2007
Posts: 635
From: Houston
Rep Power: 109
Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !
Nice numbers! Sound like you and chris were on the dyno at the same time!
 
  #12  
Old 10-22-2009 | 08:12 PM
bmoores's Avatar
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 3,574
From: Houston/Manchester
Rep Power: 330
bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !
Originally Posted by topgun
Dyno numbers don't mean much...u went 200....that counts more than the dyno numbers. Your car rips
Absolutely Tom. There were a few inquiring minds .

Originally Posted by BlownVette
Not sure if you are dynoing in RWD or AWD, but if you put someone (x1 or x2) in the back seat it might help to get some weight over the rear axle to help with the wheel slip.

Also, when I had twin-side-mounted intercoolers I used to use two high-speed-electric leaf blowers directed at the intercoolers to better replicate actual driving conditions and get air flow across the intercoolers. Regular type fans, even the squirrel cage designs, don't seem to get the job done.
Sean, dynoing RWD with the cage its hard to get someone in the back now We had a sufficient fan setup from what I could tell. We'll see what we can work out this weekend.

Originally Posted by Dr_jitsu
This is 6speed, nothing is drama free

As mentioned, you did 200 and will break 6 seconds in the 60-130 that is what really matters, however you should be close to 700 on C 16 and 1.5 bars.
Sean, I'm thinking we'll be quite a bit closer to 700 if we can get a clean dyno run. We'll see what happens though.

Originally Posted by Lil Powell
Nice numbers! Sound like you and chris were on the dyno at the same time!
He called me and told me the numbers .... reminds me of a song I know ........ Just kidding I bet its going to be a lot of fun.

http://www.youtube.com/watch?v=9F444CELomo
 

Last edited by bmoores; 10-22-2009 at 08:14 PM.
  #13  
Old 10-22-2009 | 08:15 PM
Swole Powell's Avatar
Registered User
Joined: Dec 2007
Posts: 635
From: Houston
Rep Power: 109
Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !Swole Powell Is a GOD !
I will take the shirt over the dyno numbers any day! But I hope we done hear any boom's
 
  #14  
Old 10-22-2009 | 08:23 PM
bmoores's Avatar
Thread Starter
|
Registered User
Joined: Apr 2004
Posts: 3,574
From: Houston/Manchester
Rep Power: 330
bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !bmoores Is a GOD !
Originally Posted by Lil Powell
I will take the shirt over the dyno numbers any day! But I hope we done hear any boom's

With Mr. Nenni behind the computer I don't think we will. It all depends on big bro's ability to think with his brain and not his right foot!!
 
  #15  
Old 10-22-2009 | 08:45 PM
OS Inspector's Avatar
Registered User
Joined: Aug 2009
Posts: 2,496
From: Houston Tx
Rep Power: 186
OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !OS Inspector Is a GOD !
definately interested in the new numbers i would of thought u were putting down more power with the k24's n how the car ran.

Good luck ben whos dyno were u on? Driver Source?
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Preliminary Dyno Numbers K24/20g's



All times are GMT -6. The time now is 09:24 AM.