Clutchmasters Stage 3 Clutch Review
#1
Clutchmasters Stage 3 Clutch Review
I just had this Stage 3 clutch and 72 lbs injectors installed in my car.
My car has the following mods and the stock clutch held up for 12k miles (modded). The car has total of 35k miles.
K24/18G Turbos
Milltek Exhaust Catless
5 Bar FPR , 71 lbs Injectors from EPL
EPL 1.3 Bar Flash for 93 oct.
Stock Flywheel Re surfaced.
This clutch is the closest you could get to stock pedal engagement and feel. I am very impressed with the holding power and highly recommend this to anyone thinking of upgrading clutch for their 650-700 hp cars.
The part # is Model: 20-934-HDF , I purchased mine from Titan Motor sports but there are other vendors who sell this as well.
This clutch has Fiber Tuff coating on the flywheel side on a full face disc , and has the segmented kevlar coating on the pressure plate side for strong holding power.
My car has the following mods and the stock clutch held up for 12k miles (modded). The car has total of 35k miles.
K24/18G Turbos
Milltek Exhaust Catless
5 Bar FPR , 71 lbs Injectors from EPL
EPL 1.3 Bar Flash for 93 oct.
Stock Flywheel Re surfaced.
This clutch is the closest you could get to stock pedal engagement and feel. I am very impressed with the holding power and highly recommend this to anyone thinking of upgrading clutch for their 650-700 hp cars.
The part # is Model: 20-934-HDF , I purchased mine from Titan Motor sports but there are other vendors who sell this as well.
This clutch has Fiber Tuff coating on the flywheel side on a full face disc , and has the segmented kevlar coating on the pressure plate side for strong holding power.
Last edited by vbmw335; 11-14-2009 at 06:44 PM.
#5
Glad to hear that your clutch is doing well and you have broken it in. Now lets do some pulls.
#7
I just had this Stage 3 clutch and 72 lbs injectors installed in my car.
My car has the following mods and the stock clutch held up for 12k miles (modded). The car has total of 35k miles.
K24/18G Turbos
Milltek Exhaust Catless
5 Bar FPR , 71 lbs Injectors from EPL
EPL 1.3 Bar Flash for 93 oct.
Stock Flywheel Re surfaced.
This clutch is the closest you could get to stock pedal engagement and feel. I am very impressed with the holding power and highly recommend this to anyone thinking of upgrading clutch for their 650-700 hp cars.
The part # is Model: 20-934-HDF , I purchased mine from Titan Motor sports but there are other vendors who sell this as well.
This clutch has Fiber Tuff coating on the flywheel side on a full face disc , and has the segmented kevlar coating on the pressure plate side for strong holding power.
My car has the following mods and the stock clutch held up for 12k miles (modded). The car has total of 35k miles.
K24/18G Turbos
Milltek Exhaust Catless
5 Bar FPR , 71 lbs Injectors from EPL
EPL 1.3 Bar Flash for 93 oct.
Stock Flywheel Re surfaced.
This clutch is the closest you could get to stock pedal engagement and feel. I am very impressed with the holding power and highly recommend this to anyone thinking of upgrading clutch for their 650-700 hp cars.
The part # is Model: 20-934-HDF , I purchased mine from Titan Motor sports but there are other vendors who sell this as well.
This clutch has Fiber Tuff coating on the flywheel side on a full face disc , and has the segmented kevlar coating on the pressure plate side for strong holding power.
Did you stay with the stock flywheel setup? how much for the clutch and how many hours of install?
Trending Topics
#8
Clutch is around 1300-1500 depending on where you buy from. In Chicago a good shop charges about $800- 1000 for install of Clutch at $85/hr labor rate.
Yes the flywheel is stock , but resurfaced. Its perfectly okay.
Yes the flywheel is stock , but resurfaced. Its perfectly okay.
Thread
Thread Starter
Forum
Replies
Last Post
jaehoppa
Automobiles For Sale
3
10-22-2015 09:17 PM
ECS Tuning - VW
VW Vendor Classifieds
0
09-03-2015 09:43 AM