Alpha turbo pricing help
#61
This is the dyno from EPL of my car:
You can see how it starts to fall off on the high end. This isnt the turbos fault, they are hungry turbos and require more air to be feed to them, the stock piping just is not big enough.
#62
Nice, open this up in a separate tab or window and compare against 3071 with meth, not sure what other mods audikp is running? https://www.6speedonline.com/forums/...al-3071-a.html
#64
Nice, open this up in a separate tab or window and compare against 3071 with meth, not sure what other mods audikp is running? https://www.6speedonline.com/forums/...al-3071-a.html
#69
Are the Tial Alpha series the only dual ball bearing turbos that will bolt up to the stock headers? Are the A28s the smallest in this lineup? I'd prefer a smaller compressor wheel based on the same turbo. Something that would spool even quicker than A28s and not require supporting mods beyond fuel injectors to take advantage of the turbos.
John H
John H
#71
Are the Tial Alpha series the only dual ball bearing turbos that will bolt up to the stock headers? Are the A28s the smallest in this lineup? I'd prefer a smaller compressor wheel based on the same turbo. Something that would spool even quicker than A28s and not require supporting mods beyond fuel injectors to take advantage of the turbos.
John H
John H
Perfect track turbo and can be run w/ just a 5 bar.
#72
I'm looking for top end power!!
#73
OOOPPs it wasn't mine to begin with its larrys thread!!! sorry
#74
I should have just gone to the Tial website where they list just the A28s and A30s. Be nice if they offered some A26s. Expensive for what you get though.
JH
#75
not true, they are cheaper than any other turbos out there beside 24/18g, 25/20g etc. because they work with your stock headers