Flashloading (switcher) from GIAC for your ECU!
#1
Flashloading (switcher) from GIAC for your ECU!
I promised it would be soon. So here it is.
You buy a performance file from us or any other GIAC dealer. You can do this at the location or mail the ECU in. The file is loaded through the OBDII port or a plug is plugged in the ECU on the bench. The performance software is loaded in the ECU much like the original program from the dealer or factory was installed. If you choose the switch option you then will receive not only the performance file, but the stock file as well. You receive the car or ECU back and a handheld unit. Simply plug it in to the OBDII port and the unit will control the program you want to run. The unit is a snap to use, plug it in hit the read button and the unit will flash the lights of the programs that are in the ECU. The light will then go and stay lit on the program currently loaded. Press the button you want. When completed the light will then change to that button. Unplug the unit and shove in the glove box and you are done.
No soldering, no mess. I personally run this on my own car. We loved the IBE when it came out, but this process far exceeds the older technology. The current lists of programs available are for the following:
996TT
996
997
997S
Cayenne
Boxster and S(loader soon) Currently OBDII flashing available.
If you have any questions please feel free to email or call us or your local GIAC dealer. If you are close to our shop please stop by and I can give you a hands on demo on either my TT or my wife’s Touareg
You buy a performance file from us or any other GIAC dealer. You can do this at the location or mail the ECU in. The file is loaded through the OBDII port or a plug is plugged in the ECU on the bench. The performance software is loaded in the ECU much like the original program from the dealer or factory was installed. If you choose the switch option you then will receive not only the performance file, but the stock file as well. You receive the car or ECU back and a handheld unit. Simply plug it in to the OBDII port and the unit will control the program you want to run. The unit is a snap to use, plug it in hit the read button and the unit will flash the lights of the programs that are in the ECU. The light will then go and stay lit on the program currently loaded. Press the button you want. When completed the light will then change to that button. Unplug the unit and shove in the glove box and you are done.
No soldering, no mess. I personally run this on my own car. We loved the IBE when it came out, but this process far exceeds the older technology. The current lists of programs available are for the following:
996TT
996
997
997S
Cayenne
Boxster and S(loader soon) Currently OBDII flashing available.
If you have any questions please feel free to email or call us or your local GIAC dealer. If you are close to our shop please stop by and I can give you a hands on demo on either my TT or my wife’s Touareg
Last edited by KPV; 02-17-2005 at 10:40 PM.
#4
This sounds great. A few questions
1)With the stock program reloaded, can they detect anything at the dealer?
2) Does the engine hours and mileage run with the upgrade program in place, show up when the origional is reloaded?
3)Will there be any data in the instrument pod computer that won't match the ECU data?
4)Can you get it with 2 different upgraded programs instead of upgrade and stock?
5)If GIAC writes improvements or fixes problems in a program can the new improved program be loaded into the handheld unit so there is no downtime?
1)With the stock program reloaded, can they detect anything at the dealer?
2) Does the engine hours and mileage run with the upgrade program in place, show up when the origional is reloaded?
3)Will there be any data in the instrument pod computer that won't match the ECU data?
4)Can you get it with 2 different upgraded programs instead of upgrade and stock?
5)If GIAC writes improvements or fixes problems in a program can the new improved program be loaded into the handheld unit so there is no downtime?
#5
1) Not that I am aware of. It is the exact stock file.
2)Yes
3)No, but if you do an ECU flash via mail as in send us just the ECU clear the power supply codes. This indicates the ECU lost power ( or was removed)
4)In time, at the moment it is stock and a performance file.
5)Programs are loaded in the ECU not the hand held unit. The unit is a basically a little computer that tells the ECU to switch programs. All upgrades on your file will be free. Down time will still be short and kept to 24 hr turn around.
2)Yes
3)No, but if you do an ECU flash via mail as in send us just the ECU clear the power supply codes. This indicates the ECU lost power ( or was removed)
4)In time, at the moment it is stock and a performance file.
5)Programs are loaded in the ECU not the hand held unit. The unit is a basically a little computer that tells the ECU to switch programs. All upgrades on your file will be free. Down time will still be short and kept to 24 hr turn around.
#6
Stephen,
I sent you an email pertaining to some other stuff. Please get back to me as soon as you can.
On this flash loader matter, if I have the Stage 4 and I want the Stage 4R as well, am I SOL???
I sent you an email pertaining to some other stuff. Please get back to me as soon as you can.
On this flash loader matter, if I have the Stage 4 and I want the Stage 4R as well, am I SOL???
#7
Trending Topics
#8
The picture of the hand held program selector shows that it can select from 6 programs, why are you saying you can only have 1 stock and 1 performance file? Isn't the whole purpose to allow easy switching between say a pump gas and race gas program?
#10
Ken and Tim,
Yes this will be aviable, but not at the moment. No you are not SOL, but you will have to wait a little longer. As soon as the update hits the email I will call you.
Sticky,
The unit is a dual purpose unit, it can be used in the Audo and VW as well. The unit will only respond to the amount of programs it has been programed with.
Yes this will be aviable, but not at the moment. No you are not SOL, but you will have to wait a little longer. As soon as the update hits the email I will call you.
Sticky,
The unit is a dual purpose unit, it can be used in the Audo and VW as well. The unit will only respond to the amount of programs it has been programed with.
#13
Now, aren't you guys happy there are soooo many 996tt's out there. If it wasn't for the quantity, people like GIAC couldn't afford the R&D to make such great products.
I guess there is a bright side to all this depreciation.
I guess there is a bright side to all this depreciation.