OBD-II hardware interface with an iApp
#1
01-04-2011, 06:12 PM
Join Date: Jun 2008
Location: SF Bay area
Posts: 1,076
Rep Power: 82 
OBD-II hardware interface with an iApp
#2
01-04-2011, 09:38 PM
Wanted to buy something like this - but I forget the other company that makes it - its a well known one..
#4
01-05-2011, 08:13 AM
Basic Sponsor
all those things are neat but i am not sure i would use them for data logging, slow sample rate. i'm sure the specs vary but if you want to log i would use duramtric, if you just want a quick code scanner this thing is hard to beat.
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#5
01-05-2011, 06:17 PM
One comes from KiWi that's WiFi-based:
Then you get the Rev iPhone application to view it.
There are limitation on data rate, 10Hz max so you divide 10Hz by the number of parameters you want to map to get the rate for each. e.g. if you want to monitor 4 parameters you get 2.5Hz sample rates for each.
Then you get the Rev iPhone application to view it.
There are limitation on data rate, 10Hz max so you divide 10Hz by the number of parameters you want to map to get the rate for each. e.g. if you want to monitor 4 parameters you get 2.5Hz sample rates for each.
#6
01-07-2011, 07:14 AM
Thread
Thread Starter
Forum
Replies
Last Post
albert@velosdesignwerks
American Muscle Vendor Classifieds
0
09-09-2015 04:21 PM
albert@velosdesignwerks
Other British Cars
0
09-09-2015 04:18 PM
albert@velosdesignwerks
Mini Cooper Vendor Classifieds
0
09-09-2015 04:17 PM
albert@velosdesignwerks
GT3/GT2/GT Vendor Classifieds
0
09-09-2015 03:55 PM
