Greddy Profec B Spec II question...
#1
Greddy Profec B Spec II question...
Hi gang, I have an 03 Turbo with the following mods:
-X50
-EP Stg 2 exhaust
-GIAC flash loader currently running on the 93 Pump tune
What I would like to know is if I install a Profec on my current setup can I turn the boost up to a constant 1.2-1.25bar without having to change anything else? Will the GIAC tune and or ECU compensate for the added boost?
As of right now I see 1.0-1.1 bar with seldom spikes to 1.2...
I'm running stock wastegate springs if that makes any difference. (I'm assuming changing wastegate springs to 1 bar springs would do about the same as installing the Greddy but I would rather do this instead in anticipation of other mods soon to come).
Thanks for the help!
-X50
-EP Stg 2 exhaust
-GIAC flash loader currently running on the 93 Pump tune
What I would like to know is if I install a Profec on my current setup can I turn the boost up to a constant 1.2-1.25bar without having to change anything else? Will the GIAC tune and or ECU compensate for the added boost?
As of right now I see 1.0-1.1 bar with seldom spikes to 1.2...
I'm running stock wastegate springs if that makes any difference. (I'm assuming changing wastegate springs to 1 bar springs would do about the same as installing the Greddy but I would rather do this instead in anticipation of other mods soon to come).
Thanks for the help!
#2
No you cannot use a greddy on a standard Giac flash... you need a program that changes the ceiling maps for the boost....
Also, your stock Wg will not give it to you....
You can manually turn up the Wgs a little see if it gets you .1 bar more... but then soon you will run into LIMP mode...
markski
Also, your stock Wg will not give it to you....
You can manually turn up the Wgs a little see if it gets you .1 bar more... but then soon you will run into LIMP mode...
markski
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
#3
No you cannot use a greddy on a standard Giac flash... you need a program that changes the ceiling maps for the boost....
Also, your stock Wg will not give it to you....
You can manually turn up the Wgs a little see if it gets you .1 bar more... but then soon you will run into LIMP mode...
markski
Also, your stock Wg will not give it to you....
You can manually turn up the Wgs a little see if it gets you .1 bar more... but then soon you will run into LIMP mode...
markski
P.S- I'll have the turbos out your way this coming week. I cant wait!
Thread
Thread Starter
Forum
Replies
Last Post
WheelB
Mercedes / AMG
0
09-14-2015 12:45 PM
PelicanParts.com
VW Vendor Classifieds
1
09-11-2015 02:46 PM
PelicanParts.com
BMW Vendor Classifieds
1
09-11-2015 02:46 PM
PelicanParts.com
Audi Vendor Classifieds
1
09-09-2015 03:29 PM
PelicanParts.com
Classic Porsches
0
09-04-2015 03:30 PM