I noticed a lot of posts on the dreaded trans mount and replacing it with the stock part 997-375-033-03-M100 or aftermkt solid or even using window weld. But I would appreciate a diy on changing the mount.
Question: Anything I should be aware of or a little tricky? Did you need to support or lower the trans to access the two bolts that attach the tranny mount to the tranny, as I noticed the coolant hoses appear to be in the way of getting these bolts out (by the way are these bolts 16 mm??). thank you, kenny

 

Here. More than you need, tranny mount swap appears to be straight forward.