Cannonball Run need a co-pilot!
#31
11-11-2003 | 11:55 AM
Thread Starter
|
Registered User
Joined: Jul 2003
Posts: 6,325
From: Michigan
Rep Power: 333
Okay, it looks like Hani has stepped up to the plate! This is going to be one wild trip! Ken, let Tim in Texas know we want to hook up with him once we hit the border.
AWESOME BABY!
AWESOME BABY!
#32
11-11-2003 | 12:02 PM
Damn this comminity is funny
Way to go Hani. So glad you're gonna make it Buddy. It wouldn't have been the same without ya
PS If anyone knows/can help CJV with those injectors let him know. He can't make it unless he has 'em...
Way to go Hani. So glad you're gonna make it Buddy. It wouldn't have been the same without yaPS If anyone knows/can help CJV with those injectors let him know. He can't make it unless he has 'em...
#37
11-11-2003 | 06:33 PM
Moderator
Joined: Jul 2003
Posts: 22,235
Rep Power: 1226
Scott,
The largest injectors available for the 996tt is 56 pounds. These are the stock ones. Usually you don't want to consistently drive then over eighty percent. We have raised the pressure to five bar and are driving them at 100%.
Not a good situation. Even with this overdrive we were too lean on the last dyno run. When we installed the S Car Go 90 mm throttle body, it simply out stripped the injectors capacity. At the same time we manufactured the splitter, we did not include for the added injector because we were suppose to have the RC Engineering Injectors on time.
These injectors must be high impedence to run with the OEM ECU. EVOMS/PES claims to have them, however I was told they do not sell them apart from their Stage V kit. RC Engineering claims to have them but has thus far been unable to deliver. They say they will not be available until January 2nd. I do not know of anyone else who presently claims to sell them. Oh well, it is not the end of the world.
The largest injectors available for the 996tt is 56 pounds. These are the stock ones. Usually you don't want to consistently drive then over eighty percent. We have raised the pressure to five bar and are driving them at 100%.
Not a good situation. Even with this overdrive we were too lean on the last dyno run. When we installed the S Car Go 90 mm throttle body, it simply out stripped the injectors capacity. At the same time we manufactured the splitter, we did not include for the added injector because we were suppose to have the RC Engineering Injectors on time. These injectors must be high impedence to run with the OEM ECU. EVOMS/PES claims to have them, however I was told they do not sell them apart from their Stage V kit. RC Engineering claims to have them but has thus far been unable to deliver. They say they will not be available until January 2nd. I do not know of anyone else who presently claims to sell them. Oh well, it is not the end of the world.
Last edited by cjv; 11-11-2003 at 06:39 PM.
#38
11-11-2003 | 06:37 PM
Registered User
Joined: Nov 2003
Posts: 17
From: CA
Rep Power: 0
Chad,
im friends with Alex and i see you are in need of injectors ASAP. i have a set of 6 Siemens 720CC injectors
they should be good for 626rwhp with A/F around 11-12:1 no problem
im selling them because i am installing some 1000cc injectors on my Supra
they are not off the car right at this moment but i can take them off within a day or two
im in san jose as well and can deliver them to you or Alex
im looking forward to this event and checking out all these cool Porsches
oh yea $350 and theyre yours
take care
im friends with Alex and i see you are in need of injectors ASAP. i have a set of 6 Siemens 720CC injectors
they should be good for 626rwhp with A/F around 11-12:1 no problem
im selling them because i am installing some 1000cc injectors on my Supra
they are not off the car right at this moment but i can take them off within a day or two
im in san jose as well and can deliver them to you or Alex
im looking forward to this event and checking out all these cool Porsches
oh yea $350 and theyre yours
take care
#39
11-11-2003 | 06:44 PM
Moderator
Joined: Jul 2003
Posts: 22,235
Rep Power: 1226
techmx,
That would be a perfect size. I was not aware Siemens made a 720cc high impedence injector. I know they make low impedence ones in that size which will not work on the Porsche 996tt (they will burn up or the ECU will burn up).
Do you know the ohm's of your injectors?
That would be a perfect size. I was not aware Siemens made a 720cc high impedence injector. I know they make low impedence ones in that size which will not work on the Porsche 996tt (they will burn up or the ECU will burn up).
Do you know the ohm's of your injectors?
#40
11-11-2003 | 06:55 PM
Registered User
Joined: Nov 2003
Posts: 17
From: CA
Rep Power: 0
Chad,
they are low impendance injectors BUT im not sure if they would work with your ECU or not.
check with your tuner to see if they'll work and let me know!
Alex tells me alot about your car and i would like to see it in action!
they are low impendance injectors BUT im not sure if they would work with your ECU or not.
Coil Resistance: 2.35 Ohms / Low Impedance (ECM driver modifications required)
Siemens low-Z injectors are able to operate at very high pressures with little or no degradation in performance.
Siemens low-Z injectors are able to operate at very high pressures with little or no degradation in performance.
check with your tuner to see if they'll work and let me know!
Alex tells me alot about your car and i would like to see it in action!
Thread
Thread Starter
Forum
Replies
Last Post