UW Inconel 3" race exhaust...
#20
I'm thinking it should be about 15lbs lighter. Inconel is light as a feather..
#21
I briefly discussed Ti with Chris for my system but he explained it would sound a little tinny and that since I wasn't racing stainless would be fine so that's what I went with. I really appreciated his willingness to be so honest and not up sell me. When my system was damaged in shipping he repaired it no problem and now after others seeing damage he protects them better. I may send mine back to try and retrofit some resonators just to cut the outside sound a little. I can no longer be discreet in my car! :-D
Chris has been excellent to work with, entertained all of my questions, and was patient with me when UPS tore up his work. His systems aren't cheap but they're hand built and of the three other systems I've listened to has the least interior drone.
Chris has been excellent to work with, entertained all of my questions, and was patient with me when UPS tore up his work. His systems aren't cheap but they're hand built and of the three other systems I've listened to has the least interior drone.
#22
John, what are the chances of you being able to make a small video or sound clip of both your existing SS unit and the inconel one when you have it installed? Curious to know the sound difference between the two.
#24
Try waits, getting it only to find it damaged, sending it back, waiting, and then getting it again! UPS wouldn't even allow me to examine it for damage when I got it the second time. It was either accept or reject Chris now protects the tubes with aluminum covers after what happened to mine - the tip looked like someone had taken a chisel to the edge. Chris took care of me and I'm really happy with the end result but would like it slightly quieter. I'm tempted to have him build me a second one and sell this one when I got it, we'll see come Fall
#25
Here is a Titanium exhaust Chris has available right now for those that want a 10lb exhaust on their car, or something to hang on the wall! 3" though out with 3.5" bypass.. I would never have the patience to make something like this!
[url=https://flic.kr/p/ESZ5aj]
[url=https://flic.kr/p/ESZ56G]
[url=https://flic.kr/p/ESZ5aj]
[url=https://flic.kr/p/ESZ56G]
#26
Here is a Titanium exhaust Chris has available right now for those that want a 10lb exhaust on their car, or something to hang on the wall! 3" though out with 3.5" bypass.. I would never have the patience to make something like this!
[url=https://flic.kr/p/ESZ5aj]
[url=https://flic.kr/p/ESZ56G]
[url=https://flic.kr/p/ESZ5aj]
[url=https://flic.kr/p/ESZ56G]
#27
Looks like Chris's flagship 3" Inconel/Titanium hybrid exhaust is finally ready for shipping. Note the CAT bypass resonators next to the HJS 100cell race cats. The 3" quad Titanium tips slant cut to perfectly match the bumper outline..
[url=https://flic.kr/p/Jk4Dyx]
[url=https://flic.kr/p/HvFPtR]
[url=https://flic.kr/p/HtST3V]
[url=https://flic.kr/p/Jk4Dyx]
[url=https://flic.kr/p/HvFPtR]
[url=https://flic.kr/p/HtST3V]
Last edited by pwdrhound; 06-23-2016 at 10:28 AM.
#29
We'll be at Miller again in September. The car absolutely rip now with the new tire set up. I'm pretty confident to be pushing the 3 minute mark this year. You need to come down for one of our 3 day events..
#30
Originally Posted by pwdrhound
We'll be at Miller again in September. The car absolutely rip now with the new tire set up. I'm pretty confident to be pushing the 3 minute mark this year. You need to come down for one of our 3 day events..
Last edited by z06801; 06-23-2016 at 11:34 AM.