Tire opinions (PS2 vs. RE050A PP)...
#1
Tire opinions (PS2 vs. RE050A PP)...
I am looking to get tires in the stock sizes (225x40x18, 295x30x18) for my 996tt. I was wondering if anyone could give me insight on their opinions on the Michelin PS2 vs. the Bridgestone RE050A PP. Any opinions on either tire will help.
I drive my car in Seattle as a daily driver. Haven't gotten out to the track (although I want to, but probably won't happen till next year).
Thanks,
Kunal
I drive my car in Seattle as a daily driver. Haven't gotten out to the track (although I want to, but probably won't happen till next year).
Thanks,
Kunal
#2
If you want grip (dry and wet), comfort and don't mind the softside walls then definately go for PS2's about the RE050 I don't think there's much experience around here with this specific tire but I tried them on another car and it had the same softsidewalls I hate so much. Between the two the PS2's is safest bet BY FAR but if you ask me (I got PS2's at the moment) I wouldn't buy any of those... if you want ultimate street perfomance go for Advan Neova AD07 and if want a performance tire with a bit more compliance to the street, wet conditions, etc. go for Bridgestone SO-2A N-rated which was designed for the car in the first place. Hope I could help...
#3
Originally Posted by kunal
.
I drive my car in Seattle as a daily driver. Haven't gotten out to the track (although I want to, but probably won't happen till next year).
Thanks,
Kunal
I drive my car in Seattle as a daily driver. Haven't gotten out to the track (although I want to, but probably won't happen till next year).
Thanks,
Kunal
MPS2 is what I ' d recommend..Bridgetstone is very noisy on the road.
#5
Originally Posted by vincentdds
Good idea to stay in school and finish all your requirements first then hit the track with me next year Doc.
MPS2 is what I ' d recommend..Bridgetstone is very noisy on the road.
MPS2 is what I ' d recommend..Bridgetstone is very noisy on the road.
I am leaning towards the MPS2, but the Bridgestones are $300 cheaper right now (on promotion at Tire Rack).
#7
Originally Posted by tom kerr
The MPS2's are generally accepted as "one of if not the" best all round tire for this car.
Trending Topics
#10
The RE050A PP is intended to replace the S-03, which is why they have been discontinued. Our tests found them to be as good in the wet, MUCH QUIETER, and better wearing that the S-03 was. How they compare against the PS2 will develop over time, but overall they were very good. I'm anxious to see how well it rates out as they sell, but I liked them quite a bit. For rain grip, they are a smidge better than the PS2. You can read our test results at:
http://www.tirerack.com/tires/tests/...irePageLocQty=
http://www.tirerack.com/tires/tests/...irePageLocQty=
__________________
damon@tirerack.com
877-522-8473 ext. 4643
574-287-2345 ext. 4643
**Don't forget to add my name to online orders!**
Or use this link:
http://www.tirerack.com/a.jsp?a=BH1&url=index.jsp
damon@tirerack.com
877-522-8473 ext. 4643
574-287-2345 ext. 4643
**Don't forget to add my name to online orders!**
Or use this link:
http://www.tirerack.com/a.jsp?a=BH1&url=index.jsp
#11
The current pricing of the Bridgestone is very aggressive and I'm seriously considering them. I mean good grief, a whole set is only $862 vs. $1184 for a set of PS2s. But here is what is keeping me from pulling the trigger: Compared to the PS2s, the RE050A are 4 lbs heavier each in 225/40/18, and 6 lbs heavier each in 295/30/18! This is according to the spec sheets on Tirerack's site.
Last edited by roadsterdoc; 09-18-2006 at 04:01 PM.
#12
I'm not sure why Tire rack took the link off for the R&D article for the Eagle F1-GSD but the RE050 is ranked 9th in that article.
Not sure if I am allow to do this but here is the link. It's 4.5mb.
http://www.lotususa.com/Alex/Tech/Ca...y_f1_gs_ds.pdf
The way I see it, you drive a top of the line 911 with the highest technology of Porsche dishes out. The only thing that is left between you and the road is the 4 contact patches. It's not a good idea to go cheap. Read the article and make your own decision.
Not sure if I am allow to do this but here is the link. It's 4.5mb.
http://www.lotususa.com/Alex/Tech/Ca...y_f1_gs_ds.pdf
The way I see it, you drive a top of the line 911 with the highest technology of Porsche dishes out. The only thing that is left between you and the road is the 4 contact patches. It's not a good idea to go cheap. Read the article and make your own decision.
#13
just saw one of my PS2's is mounted backwards (R rear) where the outside edge is actually mounted on the inside of the wheel. am planning on getting it swapped out soon but just wondering if that affects handling at all or any other safety issues i need to be weary of while driving before I get it fixed?
Last edited by Lizard1; 09-18-2006 at 06:42 PM.
#14
Theoretically it should behave differently specially in the wet. Michelin has a different compound on 2/3 of its width and on the outer 1/3 of the thread being specially adapted to dry conditions (makes sense as only in the dry you can really load the outer edge) but I reckon that if you drive normally (within speed limits) you won't notice the difference.
#15
Originally Posted by Alexcwt
I'm not sure why Tire rack took the link off for the R&D article for the Eagle F1-GSD but the RE050 is ranked 9th in that article.
Not sure if I am allow to do this but here is the link. It's 4.5mb.
http://www.lotususa.com/Alex/Tech/Ca...y_f1_gs_ds.pdf
The way I see it, you drive a top of the line 911 with the highest technology of Porsche dishes out. The only thing that is left between you and the road is the 4 contact patches. It's not a good idea to go cheap. Read the article and make your own decision.
Not sure if I am allow to do this but here is the link. It's 4.5mb.
http://www.lotususa.com/Alex/Tech/Ca...y_f1_gs_ds.pdf
The way I see it, you drive a top of the line 911 with the highest technology of Porsche dishes out. The only thing that is left between you and the road is the 4 contact patches. It's not a good idea to go cheap. Read the article and make your own decision.
I remember being excited about that article when that C&D issue arrived in my mailbox. After reading it I realized that it was not a pure performance test. It looked at many subjective factors as well as cost which skewed the results heavily. The results are really odd. For example:
Hankook Ventus beats Toyo T1R, Bridgestone, Pzero and BFG T/A KD!
Our favorite Michelin PS2 is fourth, behind Yokohama (3rd), Continental (2nd!), and GoodYear F1 (1st). Yeah, right!
C&D admitted that the Contis were bland and that they were surprised they made 2nd. Like many of the C&D car comparisons, they fluff up the real data with stuff that is BS to you and me. They have to please their audience (which 99% have never been to a track). I trust Grassroots Motorsports a helluva lot more for a good performance tire review.
Regarding "going cheap," Bridgestone has an excellent reputation regarding performance. They and Michelin are the top two race tire manufacturers in the world. I think trying Kumho or Hankook would be going cheap. My hope is that the new Bridgestone has been introduced with a very low price to get us to try them over our current favorite. Sure, they could turn out to be inferior to the PS2s. At this point all I have to go on is their price, Bridgestone's reputation, and their weight (they're porkers!). Worse case scenario, I think I can put up with them on the street for a year. They can't be worse than Pzeros.