New wheels are on, but doesn't look right
#1
New wheels are on, but doesn't look right
the RUF reps are on, finally all the vibrations are gone, but something doesnt look right, tires too small? maybe offset too high and I need spacers, thinking 12-15mm?
what you guys think??
what you guys think??
Last edited by SecretAznSauce; 01-09-2009 at 05:01 PM.
#4
Can't really tell much by those angles.........need a flush shot down the side.
Wheels look really nice!
What are the widths and offsets?
Stock offsets can usually run 15mm spacer and be great.
Rear tires look kinda JDM streched.
And car would look much better lowered a bit.
Wheels look really nice!
What are the widths and offsets?
Stock offsets can usually run 15mm spacer and be great.
Rear tires look kinda JDM streched.
And car would look much better lowered a bit.
Last edited by Brando; 01-09-2009 at 05:04 PM.
#5
ya rear offset on 11" is 67et, i think thats the problem. I can't lower anymore, I scrap the driveway as it is right now
#6
I see you added the last pic.....
Offsets look ok.....I think they will look fine if you put some wider tires on there.
Rears are way streched.
Tires are the only thing keeping you from flying off into the guardrail.....don't skimp on them!
Offsets look ok.....I think they will look fine if you put some wider tires on there.
Rears are way streched.
Tires are the only thing keeping you from flying off into the guardrail.....don't skimp on them!
Last edited by Brando; 01-09-2009 at 05:10 PM.
#7
Trending Topics
#9
I agree, tires are too narrow. My fronts (on the Pantera, not the Porsche) look like that because 285s are no longer available and I had to go to 245s until I get bigger (taller) wheels.
I really like the wheels.
R.
I really like the wheels.
R.
#15
Way ahead of you... :-)