Installed LED Tail lights + PowderCoated Exhaust Tips
#19
12-07-2010 | 10:20 PM
Registered User
Joined: Mar 2010
Posts: 65
From: Miami, FL
Rep Power: 17
I feel your pain
http://forums.rennlist.com/rennforum...27-post30.html
should get my second set today..finger's crossed
http://forums.rennlist.com/rennforum...27-post30.html
should get my second set today..finger's crossed
#20
12-07-2010 | 10:26 PM
Registered User
Joined: Sep 2008
Posts: 942
From: Vancouver
Rep Power: 64
That seems to be the major issue with these things... just a lucky draw if you get a good set. Think I heard someone ended up with a third and fourth set before it was sorted.
Do you have to send them back?
Cheers
Aaron
Do you have to send them back?
Cheers
Aaron
#21
12-07-2010 | 11:26 PM
Registered User
Joined: Sep 2007
Posts: 1,426
From: CT
Rep Power: 86
1.
#22
12-08-2010 | 07:31 AM
Registered User
Joined: Oct 2009
Posts: 86
From: Jacksonville Beach, FL
Rep Power: 19
I went through 3 sets until I got a good driver side and passenger side. What a pita -- although working thru amazon was pretty easy and low stress. Just took longer than I wanted to get them up and running.
#23
12-08-2010 | 07:45 AM
Registered User
Joined: Jun 2007
Posts: 551
From: Houston
Rep Power: 40
Tarek307,
does your vehicle have PSM? I was one of the original buyers when these came out and besides the hyperblinking issue...my PSM and ABS lights lit up. Probably due to the voltage coming in but wanted to check with you if your car has it and any issues with PSM.
does your vehicle have PSM? I was one of the original buyers when these came out and besides the hyperblinking issue...my PSM and ABS lights lit up. Probably due to the voltage coming in but wanted to check with you if your car has it and any issues with PSM.
#24
12-08-2010 | 12:09 PM
Registered User
Joined: Oct 2009
Posts: 86
From: Jacksonville Beach, FL
Rep Power: 19
mine does - and along with the flasher change - i had to do the resistor modification as well. Really pretty simple.
#25
12-08-2010 | 11:12 PM
Yes i have PSM and its a 2002- again as i mentioned you DONT NEED RESISTORS or anything JUST THAT 1 FLASHER RELAY- i posted its Part # and where to get it- you just take your old one out, plug this one in and thats it! no issues!
That sucks! but oh well, its worth it, i guess i'm lucky mine came perfect the first time!
Last edited by Tarek307; 12-08-2010 at 11:15 PM.
#27
12-09-2010 | 01:02 PM
Litronics as in the Turbo headlights they changed to in 2002 then yes...the xenons right? yup thats what i got!
#30
12-10-2010 | 03:21 PM
Registered User
Joined: Mar 2010
Posts: 65
From: Miami, FL
Rep Power: 17
So I made all my testing by turning ON and OFF the light switch and all was fine..
But now that I test it with the ignition key in and ready to start (or if the engine is running), my third stop light is turning on ....
Note1: that I have a LED third brake light kit installed, so I wonder if that picks up some low power that is usually in the system but not enough to lit up the blb version or... if I have another short somewhere
Note2: the picture is taken with the lgiht switch on, and the key in the on position. But I do NOT have my foot on the brake pedal.. I am taking the picture
But now that I test it with the ignition key in and ready to start (or if the engine is running), my third stop light is turning on ....
Note1: that I have a LED third brake light kit installed, so I wonder if that picks up some low power that is usually in the system but not enough to lit up the blb version or... if I have another short somewhere
Note2: the picture is taken with the lgiht switch on, and the key in the on position. But I do NOT have my foot on the brake pedal.. I am taking the picture