Litronic Headlight Swap
#1
Litronic Headlight Swap
I want to swap my stock non-litronic headlight with a set of litronics on my 99 C2 cab.
Do you guys know if this is an easy install? I've been told that all I have to do is change it out and change a fuse.
Your advise is greatly appreciated.
Thanks.
Do you guys know if this is an easy install? I've been told that all I have to do is change it out and change a fuse.
Your advise is greatly appreciated.
Thanks.
#5
Not sure if the fuse needs to be changed on a 996. Maybe it's the Boxster. I know I had to change it for the Boxster, but when I did the 996, I dont think I had to. It's the headlight fuse, and I think it has to go from 5 amp to 10 amp.....
Here it is from the Pelican article on the upgrade:
"don't forget to change the fuses!Fuses A9 and A10 need to be 15 amp fuses. Mine came that way, but it seems that some cars come with 7.5 amp fuses. I don't know why there's a difference, but Porsche's instructions are clear. Also field reports from others who have corresponded with me verify that the 7.5 amp fuses will blow. Change them now before turning anything on."
Here it is from the Pelican article on the upgrade:
"don't forget to change the fuses!Fuses A9 and A10 need to be 15 amp fuses. Mine came that way, but it seems that some cars come with 7.5 amp fuses. I don't know why there's a difference, but Porsche's instructions are clear. Also field reports from others who have corresponded with me verify that the 7.5 amp fuses will blow. Change them now before turning anything on."
Last edited by newport996; 05-21-2005 at 06:45 PM.
#6
I ordered Litronics from Suncoast for my '00 Carerra. Kit came with good directions, fuses and transformers. Installation included a bit of re-wiring and an extra .75" hole needed to be drilled on each side bulkhead for additional wiring. Litronics snapped into the existing sockets. Took about 2 hours with the additional wiring. Fun project.
#7
Thread
Thread Starter
Forum
Replies
Last Post