My 996 to 997 conversion on my C4S
#166
Stone
I also forgot to mention, the strategic placement of the "X" support on the Dasssport Roll Bar. There is no interference utilizing the rearview mirror.
This little things, most people don't find out until after the install.
The fella that helped me, his name was Colin, good guy!
I also forgot to mention, the strategic placement of the "X" support on the Dasssport Roll Bar. There is no interference utilizing the rearview mirror.
This little things, most people don't find out until after the install.
The fella that helped me, his name was Colin, good guy!
#167
Little late..
I commend you on an awesome job on your conversion. DIY is probably the most rewarding experience a person can achieve! Greatest thing is you will know your car inside and out! Congrats and enjoy your 996. P.S you must be single and no kids to have the time to devout to this project.
#169
Congrats on the engagement and 2 kids. I'm also married with 2 kids and my driving time in the 911 has diminished to lets say in 2015 I only drove 1,300 miles! I now change my oil once a year. Hope you don't follow in a lot of our footsteps, but in the end the family is worth it!!
#170
911, sounds like my life lol. Between work and my family I think I'd be exaggerating by saying I put even 600 miles on the car for the year. I see it as my getaway and I may not get to drive her often but, it keeps that rush/excitement feeling.
#172
Thank you Char. They are monoblock wheels. I got them from wheeldynamics.com. They were awesome and hooked me up. Great deal on wheels and tires. They gave me the colored porsche crest center caps for no extra charge.
#173
+1 on Wheel dynamics! Had my wheels painted by them and they did an awesome job! And price!
#174
Thanks!
#175
They are 19x9 in the front and 19x11 in the rear. Yes, I did lower the car. I used coil overs cause I had H&R springs on the car but the car just didn't sit as low as I wanted it to be. So, I swapped then out for a set of coil overs. H&R makes a great coil over set up for street and track use. They are not as good as k&w but, if you're not tracking the car weekly and all out racing it then the k&w is just a waste of money for the daily driver 911.
#176
They are 19x9 in the front and 19x11 in the rear. Yes, I did lower the car. I used coil overs cause I had H&R springs on the car but the car just didn't sit as low as I wanted it to be. So, I swapped then out for a set of coil overs. H&R makes a great coil over set up for street and track use. They are not as good as k&w but, if you're not tracking the car weekly and all out racing it then the k&w is just a waste of money for the daily driver 911.
#178
wicked motor unhappy customer
Hello, i bought the 996tt to 997 tt kit from wicked motor, after one year of waitting ,they sent me the kit with many parts missing and damaged.
now am looking for info on how to alinge the hood with wicked fender ?.thnx
now am looking for info on how to alinge the hood with wicked fender ?.thnx
#179
At this point I'm not even sure if you can even align them correctly.
#180
Alpine is right, Wicked has some WICKED bad reviews!! Can you post a pic of your hood and I can help with your alignment