Knowledge Base Thread - Do NOT create new threads..post in this one
#31
#32
Before cat Oxygen sensors
Porsche PN: 996 606 128 00 $126-$250
Bosch equivelant PN: 17044 $76 amazon or $96 Autozone
Link: https://www.6speedonline.com/forums/...ml#post3217943
Porsche PN: 996 606 128 00 $126-$250
Bosch equivelant PN: 17044 $76 amazon or $96 Autozone
Link: https://www.6speedonline.com/forums/...ml#post3217943
#34
#35
Agency Power Short Shifter Installation (on a 987 but basically the same minus the shift ****/ boot removal)
#36
996 Turbo EvoMS Intake - Air Filter Maintenance
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#37
Filling a failed transmission mount with 3m Window Weld:
https://www.6speedonline.com/forums/...ion-mount.html
FYI: This is a Polyurethane that is intended for dampening of windows. It rates at ~60A hardness. Here is the data sheet on it:
http://www.google.com/url?sa=t&sourc...W_1Krr6c67YGcg
https://www.6speedonline.com/forums/...ion-mount.html
FYI: This is a Polyurethane that is intended for dampening of windows. It rates at ~60A hardness. Here is the data sheet on it:
http://www.google.com/url?sa=t&sourc...W_1Krr6c67YGcg
Last edited by VAGscum; 09-18-2011 at 02:06 PM.
#38
DIY Front Differential Repair:
https://www.6speedonline.com/forums/...ml#post2617071
FYI about LSD(not the Timothy Leary LSD):
https://www.6speedonline.com/forums/...sd-buster.html
https://www.6speedonline.com/forums/...ml#post2617071
FYI about LSD(not the Timothy Leary LSD):
https://www.6speedonline.com/forums/...sd-buster.html
#39
DIY RS Motor Mount install:
https://www.6speedonline.com/forums/...ml#post3332488
Props to Scottslaw
https://www.6speedonline.com/forums/...ml#post3332488
Props to Scottslaw
#40
DIY Alternator replacement w/ Pictures:
https://www.6speedonline.com/forums/...-pictures.html
Props to Slider for a great post!
https://www.6speedonline.com/forums/...-pictures.html
Props to Slider for a great post!
#41
Coilover install DIY w/ pictures!!!:
https://www.6speedonline.com/forums/...read-pics.html
Huge props to Scottslaw for the contribution!!!
https://www.6speedonline.com/forums/...read-pics.html
Huge props to Scottslaw for the contribution!!!
#42
Headlight switch replacement DIY:
https://www.6speedonline.com/forums/...e-replace.html
Huge props to smistry007 for a great DIY w/ pics
https://www.6speedonline.com/forums/...e-replace.html
Huge props to smistry007 for a great DIY w/ pics
#43
Ignition lock housing replacement for when the key is hard to remove from the lock:
https://www.6speedonline.com/forums/...ml#post3395412
https://www.6speedonline.com/forums/...ml#post3395412
#44
RS LWFW conversion parts list
***Edited to correct pressure plate bolt part number***
Clutch guide tube: 950 116 813 30
Guide tube screws: 900 270 055 02 (2 ea)
Starter ring gear: 964 114 143 31
Throw out bearing: 944 116 080 01
Flywheel bolts: 928 102 151 01 (9 ea)
Flywheel: 964 102 239 31
Pilot Bearing: 931 102 111 00
Pressure plate bolts: 900 067 103 02 (9 ea)
Note:
The following is added for the addition of the lightweight RS pulley. Porsche released a TSB on the 997 GT3 related to fix an issue with this stock weight pulley coming off when the lightweight flywheel is installed. So far I have not personally heard of this happening on the 996TT, but I personally would at least re torque and loctite the pulley bolts for good measure.
996 102 017 95 Crank pulley
999 025 174 02 Washer
996 102 550 80 Bolt
***Edited to correct pressure plate bolt part number***
Clutch guide tube: 950 116 813 30
Guide tube screws: 900 270 055 02 (2 ea)
Starter ring gear: 964 114 143 31
Throw out bearing: 944 116 080 01
Flywheel bolts: 928 102 151 01 (9 ea)
Flywheel: 964 102 239 31
Pilot Bearing: 931 102 111 00
Pressure plate bolts: 900 067 103 02 (9 ea)
Note:
The following is added for the addition of the lightweight RS pulley. Porsche released a TSB on the 997 GT3 related to fix an issue with this stock weight pulley coming off when the lightweight flywheel is installed. So far I have not personally heard of this happening on the 996TT, but I personally would at least re torque and loctite the pulley bolts for good measure.
996 102 017 95 Crank pulley
999 025 174 02 Washer
996 102 550 80 Bolt
Last edited by VAGscum; 09-29-2016 at 01:04 AM.
#45
Modding Transmission case for GT2 slave conversion.
https://www.6speedonline.com/forums/...ml#post3412313
https://www.6speedonline.com/forums/...ml#post3412313