My Road to 800HP with GT3076 Turbos - Story Starts
#53
02-09-2009, 11:47 AM
Got both intake pipes completed from the compressor to the MAF pipe done. Now we are working on making the larger YPipe. This pipe is a 4inch to 3inch and retains the ability to run your stock airbox or even our carbon fiber intake kit.
#58
02-11-2009, 03:52 PM
A little further along on the Ypipe kit 
We are going to make it neck down to fit with the stock boost hoses that way a person can buy and run this YPipe seperately to use it with the stock intercoolers. We now have to fit the intercoolers to make sure everything lines up proper to be modular. After this is completed we will attack the oil and water lines on the turbo.
We are going to make it neck down to fit with the stock boost hoses that way a person can buy and run this YPipe seperately to use it with the stock intercoolers. We now have to fit the intercoolers to make sure everything lines up proper to be modular. After this is completed we will attack the oil and water lines on the turbo.
