Tuning and the Real Facts
#31
I had looked at this once before and I believe the question was why one tune would hold the timing while the others did not? In a simple answer the Knock Sensors. These are desensitized so they do not react to the stock standards. Basically the same tune with them at factory would tend to pull the timing yet not if altered.
#32
I love honesty. I've always known that "Watch Dog" would catch it every time. The good thing is Porsche usually doesn't ask a respected dealership/tech to even look for it. It doesn't just come up on the scan tool. You have to go into a different program to see the violation. Thanks Scott for your time and honesty.
Questions:
What causes these flashed cars to go through plugs? It happened to me several times along with a lot of others whether they announced it or not.
How do you feel about the new motor taking mods at this point?
Questions:
What causes these flashed cars to go through plugs? It happened to me several times along with a lot of others whether they announced it or not.
How do you feel about the new motor taking mods at this point?
#34
Yes it's part of the dealer's Scan Tool software. It's job is to determine whether the ECU has been compromised, very sophisticated, really can't be beaten. Even if you swop out ECU's the counters in the system will be off. This is even if the Porsche dealer does it. The difference is if they replace it for whatever reason they notate it in the system so your warranty won't be voided downline. In other words it can't be beaten/changed even by them. Again, PCNA usually doesn't even ask the dealer to go looking there on a warranty claim if they're a reliable dealer that doesn't turn in unreasonable amounts of claims... In other words the "Watch Dog" doesn't just pop up when they plug in to the OBD port.
#37
Does Softronic have an in-house Dyno for tuning purposes? Do you do any street tunes? Do you rely on client feedback for hp/tq gains when they dyno their car?
When you do "custom" tunes are you just manipulating data from the end user original software tables, or do you have generic file that is sent to everyone? How do you account for climate and altitude conditions for clients in various parts of the world?
What tables do you typically modify on a tune? o2, egt, ignition, ?
In the interest of full disclosure, I am not a potential client just interested in clearing up things I have heard.
When you do "custom" tunes are you just manipulating data from the end user original software tables, or do you have generic file that is sent to everyone? How do you account for climate and altitude conditions for clients in various parts of the world?
What tables do you typically modify on a tune? o2, egt, ignition, ?
In the interest of full disclosure, I am not a potential client just interested in clearing up things I have heard.
#38
I had looked at this once before and I believe the question was why one tune would hold the timing while the others did not? In a simple answer the Knock Sensors. These are desensitized so they do not react to the stock standards. Basically the same tune with them at factory would tend to pull the timing yet not if altered.
#39
If you didn't misunderstand them then they are self serving and just full of ****.
#40
Scott, this sounds like the makings of a very interesting and educational thread. I think you should focus on the the 996, 997.1 and 997.2. It would be very interesting to hear what you have to say about each, from a tuneability perspective, in relation to each other. Also, if you could simply post articles on topics that have been a mystery for years, for example '600+hp 996 tunes utilizing the stock MAF', it would be very enlightening. Your comments would be invaluable as there is currently a complete void of this kind of information available here.
Mike
Mike
#41
I am interested in where the edges are in pushing the limits of the stock engine in a 997.1 from a general tuning perspective. I think that is what many of us are searching for. Saying the same thing in a different way, what are reasonably safe parameters of the tuning segments without major risk? I'm not talking about "warranty" issues, just practical "I don't want to blow my motor up" issues. (pardon me for not being very educated in this area, but I do want to learn.)
#42
I had looked at this once before and I believe the question was why one tune would hold the timing while the others did not? In a simple answer the Knock Sensors. These are desensitized so they do not react to the stock standards. Basically the same tune with them at factory would tend to pull the timing yet not if altered.
#43
I have an AWE 750R program (with modified VTG, exhaust, manifold, TB, etc).
I put VP MS109 (RON 109) fuel for drag race and set the GIAC for race fuel software, on the way home when the fuel tank almost empty I fill 65L with pump gas 95 RON octane, and forget to change the program to pump gas.
I just remember that I forget to change the program a few days later. I didn't feel any knock at all, even with 14 octane difference. So the knock sensor must be working with GIAC software.
I have an Mitsu Evolution X tuned by Ecutek, I can definitely hear the knock even from changing RON 95 to RON 93 (2 octane difference).
So, tunes are NOT created equal. Some is better than others.
I put VP MS109 (RON 109) fuel for drag race and set the GIAC for race fuel software, on the way home when the fuel tank almost empty I fill 65L with pump gas 95 RON octane, and forget to change the program to pump gas.
I just remember that I forget to change the program a few days later. I didn't feel any knock at all, even with 14 octane difference. So the knock sensor must be working with GIAC software.
I have an Mitsu Evolution X tuned by Ecutek, I can definitely hear the knock even from changing RON 95 to RON 93 (2 octane difference).
So, tunes are NOT created equal. Some is better than others.
#44
Does Softronic have an in-house Dyno for tuning purposes? Do you do any street tunes? Do you rely on client feedback for hp/tq gains when they dyno their car?
When you do "custom" tunes are you just manipulating data from the end user original software tables, or do you have generic file that is sent to everyone? How do you account for climate and altitude conditions for clients in various parts of the world?
What tables do you typically modify on a tune? o2, egt, ignition, ?
In the interest of full disclosure, I am not a potential client just interested in clearing up things I have heard.
When you do "custom" tunes are you just manipulating data from the end user original software tables, or do you have generic file that is sent to everyone? How do you account for climate and altitude conditions for clients in various parts of the world?
What tables do you typically modify on a tune? o2, egt, ignition, ?
In the interest of full disclosure, I am not a potential client just interested in clearing up things I have heard.
I wouldn't call any tuned file generic as Porsche uses in large 3 files world wide , LEV , EU4, EU2, they do not tune each car at each location. Why? Simply the 997 40mhz DME is very adaptive as long as the info is in it. Then again this also applies to the 996 DME's that used in large LEV and ROW files untill they added EU2 and EU4. One file LEV is used by them for all of NA. This would be 91 oct,93 oct, Florida hot and humid, AZ hot and dry, CT fairly mild at times, Canada etc. Porsche does state though one given HP figure for all 3 of these worldwide.
I modify all that you listed and much more and yes each read or individual car is modified since they hold the cars VIN in the file. I otherwise could have made tunes up on a disc and send them out just for programming to Dealers and not require a read. This is not to say there is anything wrong with that either.
Last edited by Softronic; 10-07-2010 at 06:44 AM. Reason: Text