anyone running a 325/30/19 rear (997tt)
#31
255 in 20" is to big will hit shocks and probably rub . You have very little clearance already with 245 . who is building your wheels what offsets ? have they done this set up before ?
__________________
- David Nussbaum -
786 249 0127 (ext.2109)
Web: www.wheelsboutique.com
Email: David@wheelsboutique.com
YouTube Channel: https://www.youtube.com/user/WheelsBoutique
Largest HRE Dealer In The World / Largest ANRKY Dealer / BBS Premium Dealer / TechArt Premium Dealer / Vorsteiner / Rotiform / Akrapovic / iPE / Novitec / Brabus / AC Schnitzer / Mansory / Brembo / RENNTech / Weistec / Tubi / Hamman / KW / H&R and tons more.
- David Nussbaum -
786 249 0127 (ext.2109)
Web: www.wheelsboutique.com
Email: David@wheelsboutique.com
YouTube Channel: https://www.youtube.com/user/WheelsBoutique
Largest HRE Dealer In The World / Largest ANRKY Dealer / BBS Premium Dealer / TechArt Premium Dealer / Vorsteiner / Rotiform / Akrapovic / iPE / Novitec / Brabus / AC Schnitzer / Mansory / Brembo / RENNTech / Weistec / Tubi / Hamman / KW / H&R and tons more.
Last edited by WheelB; 03-06-2012 at 07:54 AM.
#32
Why order if you don't have an answer to your last question?
#33
WheelB ,
I bought the wheels from vivid racing , adv1 , deep concave adv07 .
20x13 and 20x9.
They gave me some sizes , but with their size the diff ratio is a little bit bigger , becouse of that I need more ideas and helps . Here is their sizes : 255-30-20 and 325-25-20
I bought the wheels from vivid racing , adv1 , deep concave adv07 .
20x13 and 20x9.
They gave me some sizes , but with their size the diff ratio is a little bit bigger , becouse of that I need more ideas and helps . Here is their sizes : 255-30-20 and 325-25-20
#34
WheelB ,
I bought the wheels from vivid racing , adv1 , deep concave adv07 .
20x13 and 20x9.
They gave me some sizes , but with their size the diff ratio is a little bit bigger , becouse of that I need more ideas and helps . Here is their sizes : 255-30-20 and 325-25-20
I bought the wheels from vivid racing , adv1 , deep concave adv07 .
20x13 and 20x9.
They gave me some sizes , but with their size the diff ratio is a little bit bigger , becouse of that I need more ideas and helps . Here is their sizes : 255-30-20 and 325-25-20
#37
Yeah - OP was asking about 19's. OEM 305/30-19 and 235/35-19 have a diameter difference of 2.8% (OK). 325/25-20 and 235/30-20 have a diameter difference of 3.2% (on the high end of acceptable) and the OP's setup of 325/30-19 matched with a 245/35-19 would have a diameter difference of 3.5% (again on the high end - I'd be worried).
(That is what I am going to have on mine, the wheels are 9x20 and 12x20 HRE P43).
All this talk in this thread has no hard data support. For example
STOCK:
235/35/19 has diameter 648mm
305/30/19 has diameter 666mm
Rear tyre is 2.777% bigger in diameter than front (666/648=1.0277(7))
AFTERMARKET:
245/30/20 has diameter 656mm
325/25/20 has diameter 670mm
Rear tyre is 2.134% bigger in diameter than front
If these calculations are the ones to do than there is no problem with those aftermarket tyres.
Is this the correct way to think?
Last edited by Peskarik; 04-27-2012 at 01:24 AM.
#38
Now I'm confused. Means I can run 325/30/19" rear; 245/35/19" front or not? So far, no problems. I just don't know if I will have long-term issues.
#43
i have run
front 255/35/19
rear 325/30/19
with no problem
front 255/35/19
rear 325/30/19
with no problem
__________________
ESMOTOR
Home of the Worlds quickest Porsches
1/4 mile: 7,95 @ 190 mph
100-200km/h: 2.16 sec
200-300km/h: 3.43 sec
60-130mph: 2.52 sec
100-150mph: 2.19 sec
Email: emre@esmotor.com.tr
Web: http://www.esmotor.com.tr
Instagram: http://www.instagram.com/esmotor
ESMOTOR
Home of the Worlds quickest Porsches
1/4 mile: 7,95 @ 190 mph
100-200km/h: 2.16 sec
200-300km/h: 3.43 sec
60-130mph: 2.52 sec
100-150mph: 2.19 sec
Email: emre@esmotor.com.tr
Web: http://www.esmotor.com.tr
Instagram: http://www.instagram.com/esmotor
Thread
Thread Starter
Forum
Replies
Last Post
eclip5e
Automobiles For Sale
8
04-28-2022 12:38 AM