We just got done building these first article parts on the Porsche 997.2 Turbo S dubbed "The Sleeper Race Pipes". Designed for the 2010-2012 Porsche Turbo DFI, this kit is designed to replace your cat pipes only and maintain the stock muffler. The all stainless steel pipe kit features a valvetronic remote activated valve that opens up to dump straight out of the Turbo or stay closed to go through the muffler and add a little tone to the car. Because this just replaces the factory catpipe, you still gain quiet a bit of power from the reduced backpressor and even more with the straight dump to the ground. For pricing and more info, contact me via PM or call 480.966.3040.

Stay tuned for dyno test and driving clips!

<IFRAME height=315 src="http://www.youtube.com/embed/OUHpIAwCAJ4" frameBorder=0 width=560 allowfullscreen mce_src="http://www.youtube.com/embed/OUHpIAwCAJ4"></IFRAME>

 

Pretty slick!!!

 

how much and did you guys fab one for the 997.1 or i would have to buy a 997.2 oem exhaust ? any Check engine Lights ? or O2 spacers where added ?

 

The 997.1 and 997.2 Exhausts are different. The 997.2TT is 2pieces with seperate muffler and cats where the .1 is all 1 piece. I made a valvetronic exhaust for my old 997.1TT but the market would not bare the price. This kit will have the 02 spacers built in them, however, it is most likely that you will need a ECU flash and you should buy a flash from us as your first mod as it is the best bank for the buck!

 

How do you activate the system to open the valve? Is there a switch mounted in the car?

 

Yes there is a keyfob that is remote. This is the one on the M6 Exhaust. You can see the keyfobs and hardware in the middle.

 

Reminds me of the cutouts my brother put on his 57 Chevy back in the day. Much more high tech and polished, though. Very innovative!

 

LOL thanks!

 

Interesting... Subscribed.

 

I drove the car today on the street and its pretty cool. Will post more video later.

 

Subscribed.

 

how does it sound?

can you shoot flames?

 

Sounds really good. Will put on the dyno today and get video.

 

Fun idea and I bet it's loud!

But that "JIM" is Jim Technologies of Taiwan, right?
http://www.jim.com.tw/

If so be careful with that stuff, they seem to want to manufacture stuff for everyone in the industry but the quality/fitment/design isn't the best;( Welds break and the materials are not up to snuff. I get those emails once a week! They tend to knock-off other people's parts and resell 'em etc...

 

Good try, but your cut down failed. JIM exhaust sells the valve components as well as exhausts. We bought the valves and then made the parts here at Vivid Racing. Chinese is bad right? http://www.sharkwerks.com/products.php?pid=268

I would expect better class than that from a Super Moderator