GT RS Front Fender Extension on Turbo Bumper
#33
The flares I purchased from Suncoast.
The front flares that attach to the bumper can be heat treated and formed. A skilled bodyshop can do it.
Yes, GT2 wing:
The front flares that attach to the bumper can be heat treated and formed. A skilled bodyshop can do it.
Yes, GT2 wing:
Last edited by Easy888; 12-02-2012 at 09:03 AM.
#36
Resurrecting an old thread...
Is that an OEM GT2 Wing or aftermarket?
Is that an OEM GT2 Wing or aftermarket?
#38
I've done this mod on my car.
First off you need to get the GT2RS fender flares. The GT3RS flares run a different length and won't reach to the bottom end of the front bumper on the turbo.
Secondly, the flare piece that attaches to the front turbo bumper needs to be reformed to fit the contour of the turbo bumper properly.
H&R's 7mm spacers on the front should cure the offset issue.
Here's some pics of mine:
First off you need to get the GT2RS fender flares. The GT3RS flares run a different length and won't reach to the bottom end of the front bumper on the turbo.
Secondly, the flare piece that attaches to the front turbo bumper needs to be reformed to fit the contour of the turbo bumper properly.
H&R's 7mm spacers on the front should cure the offset issue.
Here's some pics of mine:
-E
#39
#40
Hi, yes I bought my set from Suncoast. However that was about an year ago? Not sure why it wouldn't show up on their site. Perhaps give them a call?
#41
#43
Cool.. Are they a different fit then the sets made of 997TTs?