XM Radio for my PCM3!!
#1
XM Radio for my PCM3!!
Another mod....yes! I am out of control! MORE!!
Here is XM conversion kit for the PCM3 in the TT. It is actually not for the TT but will work. Earlier I had mentioned that the PIWIS showed coding for XM and Sirus. Well, here ya go!! Unit will intrface directly with the PCM and work like it was from the factory.
Here is XM conversion kit for the PCM3 in the TT. It is actually not for the TT but will work. Earlier I had mentioned that the PIWIS showed coding for XM and Sirus. Well, here ya go!! Unit will intrface directly with the PCM and work like it was from the factory.
#6
The kit is around 900 something. I am doing a write up on it now. The system will acknowledge the unit when plugged in. I tried it. I also discovered a few other issues and fixes with the kit and eliminated half the harness. I will finish it up tomorrow and post. It is pretty cool to have it pop up on the screen XM with the little yellow XM signal in the unit.
#7
Trending Topics
#11
My bad, should have not put 3 up there. It needs the latest software version out there. Poor use of words on my part.
We did get it hooked up and tested yesterday. I made the mistake of ordering the system without CD changer. However with the NAV you need the MOST with the jumpers in it to get the NAV and XM on line together. The good news is the system picks it up as soon as you plug it in.
I removed part of the harness and swapped the end plugs on the original NAV and retained that original wire. In all I have removed half of the harness that came with the kit initially. Cleans up the install.
We did get it hooked up and tested yesterday. I made the mistake of ordering the system without CD changer. However with the NAV you need the MOST with the jumpers in it to get the NAV and XM on line together. The good news is the system picks it up as soon as you plug it in.
I removed part of the harness and swapped the end plugs on the original NAV and retained that original wire. In all I have removed half of the harness that came with the kit initially. Cleans up the install.
#13
Originally Posted by PorschePhd
In all I have removed half of the harness that came with the kit initially. Cleans up the install.
#14
Originally Posted by Trundle997
PCM that is in the Turbo is v.2.1
PCM 3.0 is not out yet, should appear in the new Cayenne first then the 997 refresh.
PCM 3.0 is not out yet, should appear in the new Cayenne first then the 997 refresh.