Shifter/Handbrake w/Deviated Stitched Explained By Porsche
#1
07-03-2007 | 04:34 PM
Thread Starter
|
Registered User
Joined: May 2007
Posts: 1,946
From: Pittsburgh Area
Rep Power: 169
Shifter/Handbrake w/Deviated Stitched Explained By Porsche
I received this reply from Porsche in response to my email requesting information about the various Shifters with deviating stitching. It sure clears up a lot of confusion. Hope you find it informative.
Dear Mr. Frixxxxxxxx,
We have two types of shifter and handbrakes in leather / aluminimum:
Options ECA and DAD
To get deviating stitching on the ECA type shifter / handbrake, please order option DAX.
To get deviating stitching on the DAD type shifter / handbrake, please order option DAW.
When ordering DAX or DAW, the deviating stitching has to be specified in comment text, not Z 09991.
Attached is a sheet for clarification.
Sorry, the dashboard trim strip is not available as a single option; it is only available as part of the Carbon package (803).
Best regards
Jochen Biemann
___________________________________________
Jochen Biemann
Business Development Management
Exclusive & Tequipment
Dr. Ing. h.c. F. Porsche AG
Porschestrasse 15-19
D-71634 Ludwigsburg
Porsche sent me a great picture showing this with graphics but I can't get it to load. See the following for the picture.
http://www.rennteam.com/showflat.php...&page=0#362587
Dear Mr. Frixxxxxxxx,
We have two types of shifter and handbrakes in leather / aluminimum:
Options ECA and DAD
To get deviating stitching on the ECA type shifter / handbrake, please order option DAX.
To get deviating stitching on the DAD type shifter / handbrake, please order option DAW.
When ordering DAX or DAW, the deviating stitching has to be specified in comment text, not Z 09991.
Attached is a sheet for clarification.
Sorry, the dashboard trim strip is not available as a single option; it is only available as part of the Carbon package (803).
Best regards
Jochen Biemann
___________________________________________
Jochen Biemann
Business Development Management
Exclusive & Tequipment
Dr. Ing. h.c. F. Porsche AG
Porschestrasse 15-19
D-71634 Ludwigsburg
Porsche sent me a great picture showing this with graphics but I can't get it to load. See the following for the picture.
http://www.rennteam.com/showflat.php...&page=0#362587
#6
07-03-2007 | 05:44 PM
Thread Starter
|
Registered User
Joined: May 2007
Posts: 1,946
From: Pittsburgh Area
Rep Power: 169
Don't shoot the messenger. I emailed Porsche for a clarification and this was their reply. Check the link for the picture and it will be clearer.
The way I interpret it is;
DAD style without dev. stitching is DAD.
DAD style without dev. stitching in color to sample is DAW
DAD style with dev. stitching is DAW with a special comment on the order.
DAD style with dev. stitching & color to sample is DAW with a special comment on the order:
09991 is not needed for dev. stitching on this option.
The way I interpret it is;
DAD style without dev. stitching is DAD.
DAD style without dev. stitching in color to sample is DAW
DAD style with dev. stitching is DAW with a special comment on the order.
DAD style with dev. stitching & color to sample is DAW with a special comment on the order:
09991 is not needed for dev. stitching on this option.
#7
07-03-2007 | 06:22 PM
Registered User
Joined: May 2007
Posts: 601
From: RANCHO MIRAGE CALIF
Rep Power: 47
Trending Topics
#8
07-03-2007 | 07:52 PM
Registered User
Joined: Jul 2007
Posts: 241
From: Long Beach, CA
Rep Power: 27
GEE-BEE
Do you need me to order you a 'turbo' in red? I found a picture of a white turbo with the 'turbo' emblem painted blue... looked nice but I think red will look HOT!
PS- this is Eric from the dealership
Do you need me to order you a 'turbo' in red? I found a picture of a white turbo with the 'turbo' emblem painted blue... looked nice but I think red will look HOT!
PS- this is Eric from the dealership
#9
07-03-2007 | 08:43 PM
Registered User
Joined: Oct 2006
Posts: 1,259
From: Alberta
Rep Power: 69
I wasn't logged in before so I didn't see the pics. Porsche makes that stupid, it shows it as the same shifter but stitching is available. Just a stab in the dark...but I would guess that if you orer DAW & everything else is 09991, then you shouldn't have to ask your dealer to type it in the comment line.
Sh*t like this pisses me off...
Sh*t like this pisses me off...
#13
07-05-2007 | 09:55 AM
Registered User
Joined: Oct 2006
Posts: 1,259
From: Alberta
Rep Power: 69
I emailed my dealer about this the other night:
It better show up right.
Yes it will have the deviated stitching on it Jason. I emailed Porsche to
make sure and they informed me it will.
Craig.
------------------------------------------------------
Craig, I just read a forum post that you should ask Porsche Canada about. A
guy from Tequipment says that with the exclusive option shifters such as my
DAT, the 09991 option is not good enough for deviated stitching, you need to
specify it in the comment text. I don't know if this was done, but let me
know.
I don't know why they don't make it simpler.
Jason
make sure and they informed me it will.
Craig.
------------------------------------------------------
Craig, I just read a forum post that you should ask Porsche Canada about. A
guy from Tequipment says that with the exclusive option shifters such as my
DAT, the 09991 option is not good enough for deviated stitching, you need to
specify it in the comment text. I don't know if this was done, but let me
know.
I don't know why they don't make it simpler.
Jason
It better show up right.
#14
07-09-2007 | 05:19 AM
Registered User
Joined: Jul 2005
Posts: 65
From: Oman
Rep Power: 23
very confused
i have a guards red with black interior with every stitching in red. but the gearshifter didnt have that option and the dealer doesnt know anything about it.
here you mention the codes but i have the whole carbon fibre package and do you know which code i should get to get the deviated stitching as the dealer would like to know. this will really help me out thanks
here you mention the codes but i have the whole carbon fibre package and do you know which code i should get to get the deviated stitching as the dealer would like to know. this will really help me out thanks
#15
07-09-2007 | 10:15 AM
Thread Starter
|
Registered User
Joined: May 2007
Posts: 1,946
From: Pittsburgh Area
Rep Power: 169
Originally Posted by SHAIKH
i have a guards red with black interior with every stitching in red. but the gearshifter didnt have that option and the dealer doesnt know anything about it.
here you mention the codes but i have the whole carbon fibre package and do you know which code i should get to get the deviated stitching as the dealer would like to know. this will really help me out thanks
here you mention the codes but i have the whole carbon fibre package and do you know which code i should get to get the deviated stitching as the dealer would like to know. this will really help me out thanks