Spacers - pros and cons?
#16
I installed H&R 7mm up front and 15mm in the rear. the look great and i can even feel the difference in handling. something that i didn't like was that the front spacers spin freely when the wheels are off. the rear spacers have a hole that aligns with a screw hole in the rotor so that i could lock the spacer in place. the front rotors didn't seem to have any such screw holes. any suggestions on how to lock the front spacers so that they don't spin?
#17
Some manufacturers do include longer hardware than needed, so it MAY be possible to add a 3-5mm without adding new hardware. Obviously getting proper thread engaement is the critical factor. But you HAVE to take the time to find out. Being passed on the highway by one of your own wheels because you got lazy is certainly not a good day.
From our website: Bolt/nut size, recommended torque range, minimum number of turns needed.
12 x 1.5 mm: 70 - 80 ft. lbs, 6.5 turns
12 x 1.25 mm 70 - 80 ft. lbs, 8 turns
14 x 1.5 mm 85 - 90 ft. lbs, 7.5 turns
14 x 1.25 mm 85 - 90 ft. lbs, 9 turns
7/16 in. 70 - 80 ft. lbs, 9 turns
1/2 in. 75 - 85 ft. lbs, 8 turns
9/16 in. 135 - 145 ft. lbs, 8 turns
From our website: Bolt/nut size, recommended torque range, minimum number of turns needed.
12 x 1.5 mm: 70 - 80 ft. lbs, 6.5 turns
12 x 1.25 mm 70 - 80 ft. lbs, 8 turns
14 x 1.5 mm 85 - 90 ft. lbs, 7.5 turns
14 x 1.25 mm 85 - 90 ft. lbs, 9 turns
7/16 in. 70 - 80 ft. lbs, 9 turns
1/2 in. 75 - 85 ft. lbs, 8 turns
9/16 in. 135 - 145 ft. lbs, 8 turns
#18
yeah. i know that when the lug bolts are bolted, the spacers don't turn. but when removing wheels, i have to line up the spacers on front when i mount the wheel. the front spacers don't fasten to the front rotors. my rear spacers fasten with a screw to the rotors so that they don't spin when mounting the wheels. so, my orginal question was -- is there a way to fasten the front spacers to the rotor?
#19
yeah. i know that when the lug bolts are bolted, the spacers don't turn. but when removing wheels, i have to line up the spacers on front when i mount the wheel. the front spacers don't fasten to the front rotors. my rear spacers fasten with a screw to the rotors so that they don't spin when mounting the wheels. so, my orginal question was -- is there a way to fasten the front spacers to the rotor?
#20
to quote dr. ferdinand:
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
#21
to quote dr. ferdinand:
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
#22
to quote dr. ferdinand:
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
"2. eliminates the drag racer boy look of the staggered fitment"
lol... i suppose.... well, there are a lot of drag racer boy p-cars, f-cars, etc but to each his own...
some manufacturers are actually going with the staggered setup now as a default (i.e. mercedes)... personally i think running the same with tires on a p-car would look like ***... (imagine 295's on the front)
I meant it more like a real drag racer from an episode of Pinks with front tires that look like spares
On the M5, the rear rim looks different from the front because it has a 2 inch lip. On the Porsche (and most other staggered fitments) esthetically the rims look the same when viewed frontally, so one can't destinguish if they are 9 or 11 inches deep...
I forgot another positive, for me at least. Steering is a bit heavier, as can be expected due to the slighter heavier wheel/tire and wider patch hitting the road. I personally don't mind, one thing I hate is too light of a steering feedback.
#23
When using wheel spacers, it is important to have the bolts torqued correctly. The wheel is fastened to the hub by two mechanisms, direct shear force in the body of the bolt and friction between the mounting surfaces of the wheel and hub. Loose bolts do not generate the proper clamping force and leave only the bolt to secure the wheel. The long bolts are subject to fatigue stresses from higher bending moments and can crack. This can also happen with standard length bolts that are not tightened properly.
#24
yeah. i know that when the lug bolts are bolted, the spacers don't turn. but when removing wheels, i have to line up the spacers on front when i mount the wheel. the front spacers don't fasten to the front rotors. my rear spacers fasten with a screw to the rotors so that they don't spin when mounting the wheels. so, my orginal question was -- is there a way to fasten the front spacers to the rotor?
Last edited by jhbrennan; 03-25-2008 at 07:33 AM.
#25
Here's what I was referring to in an earlier post. The "assemby aid" used to be part of the tool kit but you can buy from your dealer for $10 or so. I use two. Not only will this tool help keep you from banging the rotors, it will also keep the spacer from moving while you mount the wheels. I've attached a picture that shows what it looks like with a spacer. Good luck.
#26
Here's what I was referring to in an earlier post. The "assemby aid" used to be part of the tool kit but you can buy from your dealer for $10 or so. I use two. Not only will this tool help keep you from banging the rotors, it will also keep the spacer from moving while you mount the wheels. I've attached a picture that shows what it looks like with a spacer. Good luck.
It is called a Wheel Mounting Guide Bolt, Porsche Part Number 99957107430. I paid about $10 for this, can be purchased at an Porsche Dealer.
#27
Thanks for posting the part number - saved me looking through a lot of old invoices. Buy two if you have PCCB's.
#28
Why two for PCCB's, are you afraid of hitting the rotor with the wheel? or is some other reason?
#29
To keep from hitting that expensive ceramic rotor. Manual recommends two also.