Just droped my car off at VF-Engineering for SC kit
#16
That is correct. The sc kit was sold as the Evoms/Vf Sc kit. You can still see the kit on some of their old magazine ads. Evoms has pulled the kit from their website. I don't know the exact reason why, just that they wanted to go in a different direction. Vf now markets and sells the kits. I don't know exactly how they are changing but they said that they would run more boost for more power.
#18
I am very pleased with VF-Engineering. Over the past month, I've worked with Nik on some supercharger maintenance questions and he is very responsive and a pleasure to work with.
#21
#22
Exactly. No one ever told me when and how often to check until I spoke with Nik ... Go figure
#24
Is it an intercooled intake like Ruf and/or a third radiator?
#25
Im not to familiar with the ruf kit, but the VF kit has watercooled I/C with its own water pump,lines and fill canister. Its self contained. It also comes with a with an oem front radiator like the gt3.
#26
Here are the parts in the kit
Vortech V2 Centrifugal Supercharger
-CNC Machined Billet Aluminum Supercharger Mount
-Cast Aluminum Liquid to Air Intercooler
-Billet Aluminum EVO “Supercharged” Serial Number Plate
-OEM Porsche center radiator kit w/ air duct and spoiler molding
-Bosch High Flow quiet water pump
-Roto-molded fresh air intake system w/ high flow air filter
-Laser cut MAF mount with 3.5" housing
-Roto-molded charge air plumbing
-Roto-molded water reservoir & fill tank
-Bosch Diverter Valve
-6-High Flow Bosch Fuel Injectors
-Custom oil feed and oil drain lines
-CNC Machined oil feed and drain fittings
-Proprietary GIAC tuned Motronic Control Unit
-Goodyear water lines
-Longer serpentine belt utilizing the OEM belt tensioner
-Crank case ventilation system
-Water pump wiring harness
Vortech V2 Centrifugal Supercharger
-CNC Machined Billet Aluminum Supercharger Mount
-Cast Aluminum Liquid to Air Intercooler
-Billet Aluminum EVO “Supercharged” Serial Number Plate
-OEM Porsche center radiator kit w/ air duct and spoiler molding
-Bosch High Flow quiet water pump
-Roto-molded fresh air intake system w/ high flow air filter
-Laser cut MAF mount with 3.5" housing
-Roto-molded charge air plumbing
-Roto-molded water reservoir & fill tank
-Bosch Diverter Valve
-6-High Flow Bosch Fuel Injectors
-Custom oil feed and oil drain lines
-CNC Machined oil feed and drain fittings
-Proprietary GIAC tuned Motronic Control Unit
-Goodyear water lines
-Longer serpentine belt utilizing the OEM belt tensioner
-Crank case ventilation system
-Water pump wiring harness
#28
Sorry to hear and good luck...
We dropped off our 645Ci back in 2004 as part of the sponsorship package. They used our car at bimmerfest and put a proto hardware in there. VF had the car for over 10 months and nothing was ever done. It's 4 years later now and they still have never delivered a product...
Hope you have better luck....
Personally, I would never-ever work with Nik at VF again...
Hope you have better luck....
Personally, I would never-ever work with Nik at VF again...
#29
We dropped off our 645Ci back in 2004 as part of the sponsorship package. They used our car at bimmerfest and put a proto hardware in there. VF had the car for over 10 months and nothing was ever done. It's 4 years later now and they still have never delivered a product...
Hope you have better luck....
Personally, I would never-ever work with Nik at VF again...
Hope you have better luck....
Personally, I would never-ever work with Nik at VF again...
That would worry me a bit but they do have M3 and 911 superchargers out that seem to work well.