Installed PSE but now I have a rattle
#32
I have to say that considering my valves are not always open but it does make the rattle, that I am in the same boat as the rattle crowd, regardless if its open all the time or not.
I've noticed its gotten 'worse' over time. If it is a fluid related 'crime' or a bearing, I'd love to have the thing topped up or the bearing replaced cause its one thing that plagues my daily driving pleasure on the reg.
Upon further inspection, I noticed two small dents on the muffler tip on the side that it appears to be coming from. I'm talking like 2 to 3 mm wide and a mm deep. Its almost as if the previous owner tapped a curb or something. I called Porsche and spoke to a service dude there and he said that exhausts are one of the last things to 'go' but he'll check it out this coming monday.
by the way, mine doesnt go away after shes warmed up or a within a certain time period of driving. I wonder if my fluid is fully gone...emtpy or the bearing is just ground to a bloody pebble...
that is...if there actually is fluid or some sort of bearing ...hahaha
ugh fek.
I've noticed its gotten 'worse' over time. If it is a fluid related 'crime' or a bearing, I'd love to have the thing topped up or the bearing replaced cause its one thing that plagues my daily driving pleasure on the reg.
Upon further inspection, I noticed two small dents on the muffler tip on the side that it appears to be coming from. I'm talking like 2 to 3 mm wide and a mm deep. Its almost as if the previous owner tapped a curb or something. I called Porsche and spoke to a service dude there and he said that exhausts are one of the last things to 'go' but he'll check it out this coming monday.
by the way, mine doesnt go away after shes warmed up or a within a certain time period of driving. I wonder if my fluid is fully gone...emtpy or the bearing is just ground to a bloody pebble...
that is...if there actually is fluid or some sort of bearing ...hahaha
ugh fek.
#33
lol
you know...its really hard to tell sometimes.
Petition to ban certain members is currently being worked on.
fek still...
you know...its really hard to tell sometimes.
Petition to ban certain members is currently being worked on.
fek still...
#34
"Awww, come on guys, it's so simple. Maybe you need a refresher course! It's all ball bearings nowadays. Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. And I'm gonna need 'bout ten quarts of anti-freeze, preferably Prestone. No, no make that Quaker State. "
CATTMAN
CATTMAN
#35
Too funny. I didn't think my comment would get any traction! To be certain, this is not a fluid deprivation issue!
#37
I am sorry, I though you had already caught on.
I had an employee calling every John Deer number he could get his hands on search for muffler bearings. I let him of the hook the next day. He did not have such a good sense of humor about it. It was the first big mower he had sold and it took a little of the pride away I guess. The sad thing was no one. I mean no one at John Deer said there was no such thing. He just kept getting the run around or let me look into it and I will call you back.
Hope you get your problem fixed.
I had an employee calling every John Deer number he could get his hands on search for muffler bearings. I let him of the hook the next day. He did not have such a good sense of humor about it. It was the first big mower he had sold and it took a little of the pride away I guess. The sad thing was no one. I mean no one at John Deer said there was no such thing. He just kept getting the run around or let me look into it and I will call you back.
Hope you get your problem fixed.
#38
Eddie...It's actually the air. The high levels of smog in Yorba Linda cause the rattling noise. If you move, it should solve the problem. If you though your wife was mad about the Fabspeeds, wait 'till you tell you have to move to solve the rattling problem.
#40
Just to circle back here...I just had my car in at the dealer today to look at the rattling sound from the PSE. Indeed! They found a rusted off clip and "replaced clip for sport exhaust vacuum line hose."
After the fix, the exhaust sounds completely different! It's definitely not as loud and raspy. But it doesn't rattle anymore.
Given that the fix was a vacuum line hose and that the sound is very different now, it doesn't seem that this was a mechanical rattle from a piece of metal.
After the fix, the exhaust sounds completely different! It's definitely not as loud and raspy. But it doesn't rattle anymore.
Given that the fix was a vacuum line hose and that the sound is very different now, it doesn't seem that this was a mechanical rattle from a piece of metal.
Last edited by CMOS; 04-17-2009 at 10:27 PM.
#43
I went in this am and saw the service fella who told me that he hears the rattle...but will have to take off the bumper to look at the heat shield. I'm scheduled to go back in May 11th. I'll update the thread after the findings have been revealed.
Glad you got your rattle fixed up there CMOS.
Glad you got your rattle fixed up there CMOS.
#45
Dally, if you installed the PSE yourself(?) why don't you remove it to see if the rattle goes away? Standard trouble shooting says that if you had no rattle prior to the PSE, then had a rattle after the PSE, there is no point in removing the bumper...start at the apparent cause. Just a thought. Besides, you have time until the 11th to investigate yourself.
J
J