I have just finished installing my Dension 500 Gateway into my 997. The problem I am having is that I can't find anywhere to run the microphone into the ****pit of my car. I have pull the plastic out of the trunk, shined a flashlight in every nook and cranny but I can't find a hole that leads into the car. I have to be missing something. Anyone have advice that has installed this system? Thanks for the help!

 

Get a flashlight and look above pedals in the cabin. Look at solid metal rod with torx style edges that goes down from steering column. 4-5 inches to the left from it and slightly above there is another metal part coming into cabin with rubber gasket around it. In my car dealership mechanic made a little hole in that gasket and mic cord enters right there from trunk space.

 

This may help: https://www.6speedonline.com/forums/...o-g-rides.html


Look for a rubber grommets near the battery, may need to remove battery. When you find a good place to run your wire through use some safety wire or something similar to fish your microphone wire through with. Hope that helps.

 

In the front boot:
-Unplug the car's battery.
-Remove the bolt and bracket from the left side of the battery, which holds it in place.
-Slide the battery to the left.
-You should now see a round rubber grommet.
-Feed the foam end of the microphone through that rubber grommet.

Now inside the car:
-Raise the steering wheel.
-Look up, behind the pedals.
-You should see the foam end of the microphone wire.

From here, you have several choices in terms of routing and placing the mic.
CATTAMAN

 

got it! Thanks for all the help.

 

Glad we could help.
CATTMAN