Installed the Fabspeed competition intake today
#16
07-02-2010 | 12:24 AM
Registered User
Joined: Jun 2010
Posts: 4
From: seattle
Rep Power: 0
I ordered it from Fabspeed. also can someone tell how i can get a picture of the car to show up next to my name?. I have uploaded some pictures to the garage but cant see how I show it next to my user ID. thanks.
#17
07-02-2010 | 08:58 AM
Registered User
Joined: Dec 2007
Posts: 131
From: Texas
Rep Power: 22
yes its not quite as easy as the video looks!. For a start the rubber inserts for the heat shield do not fit in the holes and i did have to shave a little off with a Stanley knife. Even still i could only get the dam things started by hand. in the end I put the fasteners in hand tight(just so i had something solid to hit!) and wait for it....close your eyes...got a block of wood and a hammer to push them on there way!
!. also the AL bar that attaches to the block does not sit any where near flat on the carbon intake on mine. this is because it would have been impossible to get the red hose on at the business end. so i literally just got the AL support fastener started(to allow max adjustment at the other end) then fought with getting the red hose on for 5 minutes. once the hose was on i went back and tightened the AL support bar as far as i dared.!!. it looks real slick now it in though!
I already had the full fabspeed kit apart from the intake on the car. it sounds fantastic(more exotic note) and a lot louder when when accelerating hard but no louder when cruising. there is not doubt it is possible to feel a gain in power. how much?..i don't know but it feel quicker. would i recommend it. yes, you must get it!.
!. also the AL bar that attaches to the block does not sit any where near flat on the carbon intake on mine. this is because it would have been impossible to get the red hose on at the business end. so i literally just got the AL support fastener started(to allow max adjustment at the other end) then fought with getting the red hose on for 5 minutes. once the hose was on i went back and tightened the AL support bar as far as i dared.!!. it looks real slick now it in though! I already had the full fabspeed kit apart from the intake on the car. it sounds fantastic(more exotic note) and a lot louder when when accelerating hard but no louder when cruising. there is not doubt it is possible to feel a gain in power. how much?..i don't know but it feel quicker. would i recommend it. yes, you must get it!.
I used a short socket extension to barely dilate the mounting holes, added a small bit of your favorite water based lubricant and the well-nuts fit perfectly.
Customer service at Fabspeed is excellent. Highly recommend it.
#21
07-06-2010 | 10:49 AM
Hey guys, thanks for the feedback and the intake it looks great Alex. I know the grommets are a tight fit and we are going to modify them a little so they going in much easier. I will have them ready for shipping next week and I can offer a $40 6speed member discount to anyone thats interested. Let me know if you would like one and I will hold one for you. You can call me directly with your information or you can PM me and I will call you when its ready to ship. Let me know if you have any questions.
Thanks,
Thanks,
Last edited by Fabspeed Motorsport; 07-06-2010 at 10:58 AM.
#22
10-22-2010 | 02:05 PM
Registered User
Joined: Sep 2010
Posts: 37
From: nj
Rep Power: 16
I love it
Hey guys, thanks for the feedback and the intake it looks great Alex. I know the grommets are a tight fit and we are going to modify them a little so they going in much easier. I will have them ready for shipping next week and I can offer a $40 6speed member discount to anyone thats interested. Let me know if you would like one and I will hold one for you. You can call me directly with your information or you can PM me and I will call you when its ready to ship. Let me know if you have any questions.
Thanks,
Thanks,
Just wanted thank Alex for his help on the competition intake. I've had it for a couple of months and really loved it. It looks sounds and feels amazing. What else can I ask for
. I've had a bunch of track days with it and my car redlines earlier than before. I got a lot of compliments on the track with it. I have the 200 cell cat which is also fantastic.
#23
10-22-2010 | 02:28 PM
Registered User
Joined: Apr 2010
Posts: 1,121
From: San Diego
Rep Power: 99
I feel the same with my fabspeed CAI. I first got the tubi exhaust with cross bars and bmc air filters. Then a few months later got the softtronic tune. At this point I did not feel that much improvement in performance. Then a few months later I got the fabspeed CAI. It not only looks and sounds much better, but it pulls much harder after 3k rpm. It feels like a new car after this last mod. Maybe I am delusional about he increase in performance but thats OK by me. Enjoy!
#24
10-22-2010 | 03:05 PM
Registered User
Joined: Sep 2010
Posts: 37
From: nj
Rep Power: 16
I feel the same with my fabspeed CAI. I first got the tubi exhaust with cross bars and bmc air filters. Then a few months later got the softtronic tune. At this point I did not feel that much improvement in performance. Then a few months later I got the fabspeed CAI. It not only looks and sounds much better, but it pulls much harder after 3k rpm. It feels like a new car after this last mod. Maybe I am delusional about he increase in performance but thats OK by me. Enjoy!
#25
10-22-2010 | 03:41 PM
Registered User
Joined: Oct 2010
Posts: 6
Rep Power: 0
Hey guys, thanks for the feedback and the intake it looks great Alex. I know the grommets are a tight fit and we are going to modify them a little so they going in much easier. I will have them ready for shipping next week and I can offer a $40 6speed member discount to anyone thats interested. Let me know if you would like one and I will hold one for you. You can call me directly with your information or you can PM me and I will call you when its ready to ship. Let me know if you have any questions.
Thanks,
Thanks,
#26
10-22-2010 | 03:49 PM
Registered User
Joined: Aug 2010
Posts: 168
From: Maryland, USA
Rep Power: 24
The Alex Man, I recently completed the same install, although with the "Y" dual tip version. While extremely satisfied with the fit and finish, I would like to extend the heat shield for greater separation of the intake from the engine bay - any interest in trying to compare notes on a design to make this happen ? Thanks.
#28
10-25-2010 | 04:45 PM
Hi Dial911, yes I will still honor the $40 Discount for you. PM me or email me at Alex@fabspeed.com if you are interested or have any questions and get it handled for you.
Hi Jacques, thanks for the feedback and we are always looking for improvements, so feel free to email me or pm me your info and I will look into it with my guys for our next production on the heat shields.
Hi h1sp, no this Intake upgrade will not affect your warranty in any way and only make an improvement on your car for sound and power. Let me know if you have any questions at all and PM if you are interested in the Intake and I will work out a 6speed member discount for you.
Thanks guys,
The Alex Man, I recently completed the same install, although with the "Y" dual tip version. While extremely satisfied with the fit and finish, I would like to extend the heat shield for greater separation of the intake from the engine bay - any interest in trying to compare notes on a design to make this happen ? Thanks.
Hi h1sp, no this Intake upgrade will not affect your warranty in any way and only make an improvement on your car for sound and power. Let me know if you have any questions at all and PM if you are interested in the Intake and I will work out a 6speed member discount for you.
Thanks guys,
Thread
Thread Starter
Forum
Replies
Last Post
vividracing
Nissan GTR
0
08-19-2015 03:11 PM
ECS Tuning - VW
VW Vendor Classifieds
1
08-19-2015 09:58 AM
