997 C2S Wheel Offsets - 20" Work Brombacher
#1
997 C2S Wheel Offsets - 20" Work Brombacher
Hey guys,
I got a set of 20" Work Brombachers. I am going to re-barrel the rears with Work barrels (long story), and I was wondering what the correct offset would be for a 997 NB.
The fronts will are:
20x8.5 +56 (probably need to add 10mm spacer to be decently flush, please correct me if I'm wrong) - these are not going to be re-barreled, they will stay 8.5 width.
For the rears, I'm thinking:
20x11.5 +56 w/ 305/25
I also have the option of going 20x11 +50, or 20x11 +63.
Here is the link to the spec sheet. Please let me know which rear offset would work best. All of the wheel faces are A-disk.
http://www.workwheelsusa.com/media/w...r_SPEC09A4.pdf
I got a set of 20" Work Brombachers. I am going to re-barrel the rears with Work barrels (long story), and I was wondering what the correct offset would be for a 997 NB.
The fronts will are:
20x8.5 +56 (probably need to add 10mm spacer to be decently flush, please correct me if I'm wrong) - these are not going to be re-barreled, they will stay 8.5 width.
For the rears, I'm thinking:
20x11.5 +56 w/ 305/25
I also have the option of going 20x11 +50, or 20x11 +63.
Here is the link to the spec sheet. Please let me know which rear offset would work best. All of the wheel faces are A-disk.
http://www.workwheelsusa.com/media/w...r_SPEC09A4.pdf
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-18-2015 03:42 PM
PelicanParts.com
997 Turbo Vendor Classifieds
0
08-18-2015 03:41 PM
PelicanParts.com
997 Vendor Classifieds
0
08-18-2015 03:39 PM
20, 20s, 6speedonline, 997, brombacher, brombachers, c2s, camber, fitment, offset, offsets, rear, wheel, wheels, work