997.1 LED Tail Lights - Dectane
#241
You do need to swap the brackets, you need to remove the top and bottom (t25 torx screw) to take out the light. The bracket is a regular phillip screw. It's one screw you need to remove, you have to re-used the brackets for the new lights. It's an easy and really quick job.
#242
When did you order yours ynot? Mine shipped on 6/16 but am still eagerly awaiting....
Just installed my toddler's Recaro seat in the back so he can enjoy these declines with daddy....
Just installed my toddler's Recaro seat in the back so he can enjoy these declines with daddy....
Got mine today!!!!
Here it is, all boxed up
Nicely wrapped
All wrapped up
Unwrapped and ready to install
Good-bye old OEM taillights
Hello new LED tails on the left
Both installed
Final product
Have to say it was a pretty quick and easy installation. I am impressed with the product, looks very OEM. Looks so much better than stock.
Here it is, all boxed up
Nicely wrapped
All wrapped up
Unwrapped and ready to install
Good-bye old OEM taillights
Hello new LED tails on the left
Both installed
Final product
Have to say it was a pretty quick and easy installation. I am impressed with the product, looks very OEM. Looks so much better than stock.
#243
I thought the two torx screws held the bracket to the body and the lamp was connected to the bracket by the phillip screw. If that is the case why would you need to remove the bracket when you can remove the lamp from the bracket (leaving it in place) by simply removing the phillip screw and then installing new lamp by replacing the phillip screw.
http://www.youtube.com/watch?v=5jIGd...layer_embedded
June 16th, got it today June 22th, a week and a day, not bad, considering it came all the way from Germany.
#244
I have to say those lights look great and look of great quality.
I was thinking....did any of you remove solid red tail lights when you installed these? Depending I would be interested in purchasing them. Solid red tail lights are part of my overall plan that I am pulling together for my 997.1
Thanks much,
Matt
I was thinking....did any of you remove solid red tail lights when you installed these? Depending I would be interested in purchasing them. Solid red tail lights are part of my overall plan that I am pulling together for my 997.1
Thanks much,
Matt
#245
I thought the two torx screws held the bracket to the body and the lamp was connected to the bracket by the phillip screw. If that is the case why would you need to remove the bracket when you can remove the lamp from the bracket (leaving it in place) by simply removing the phillip screw and then installing new lamp by replacing the phillip screw.
#246
It can be done either way. I assumed that the bracket was part of the light fixture so removed and attached the bracket to the light. I can see where someone would assume the bracket is part of the body and just leave in place. Either way works...and the look is great!
#247
Matt: I got a pair of red tail lights that came with my 08 C2S. I haven't decided to upgrade to LED's yet but if you make an offer that would offset enough of my LED purchase price, I might just do it.
#248
A while ago I posted that my friend's company has been working on a deal to import the Dectane lights directly from Europe or China. That's finally happened. He was not able to get them directly from DEPO (despite about 10 calls to them!) because Dectane has exclusive European distribution rights to these lights for a few more months and the US DEPO distributor, Maxzone, does not carry them yet and cannot order them. But he was able to get them from Orange's distributor in Europe. He can do $600 shipped to you in the US. And I can tell you the margin on selling these for $600 is next to nothing. He really wanted to come in less, but there is just no way without buying directly from DEPO. If you live in CA you will have to pay sales tax as his business is located there. He's ordered 6 sets and 2 are spoken and paid for so far.
If you are interested, you can PM me or email the company directly (that would be easier). The contact email is below. He can accept paypal or credit cards over the phone if preferred. If the next 4 slots fill up quickly, he can order more. Timing is the same as the Orange lights. Dectane is expecting their next shipment on 7/1 and the lights well be sent out to the resellers at that time and then on to the buyers. Thanks.
Revolution Motorsports:
info@revoms.com
http://www.revoms.com
If you are interested, you can PM me or email the company directly (that would be easier). The contact email is below. He can accept paypal or credit cards over the phone if preferred. If the next 4 slots fill up quickly, he can order more. Timing is the same as the Orange lights. Dectane is expecting their next shipment on 7/1 and the lights well be sent out to the resellers at that time and then on to the buyers. Thanks.
Revolution Motorsports:
info@revoms.com
http://www.revoms.com
#249
I love them!
My package arrived Tuesday and couldn't get chance to install till last night at midnight! (Come on now, we all suffer the same level of OCD so I'm sure you would have done the same, being you first opportunity to install.)
Install took me a little long ONLY because I HAD to clean out the rear tail light cavity before installing new LED units. I also wrapped the new lights cord/connector bundle in some pliable closed cell foam material. So that cords or connectors don;t rattle around in the tail light cavity and give me something else to obsess over!
After all was said and done they went in easily and look FANTASTIC. I must say the videos amd pics are good but seeing first hand...there is no comparison! LOVE the look and would do it again.
If anyone is on the fence, just buy them you will NOT regret it!
Install took me a little long ONLY because I HAD to clean out the rear tail light cavity before installing new LED units. I also wrapped the new lights cord/connector bundle in some pliable closed cell foam material. So that cords or connectors don;t rattle around in the tail light cavity and give me something else to obsess over!
After all was said and done they went in easily and look FANTASTIC. I must say the videos amd pics are good but seeing first hand...there is no comparison! LOVE the look and would do it again.
If anyone is on the fence, just buy them you will NOT regret it!
#250
Agreed with above op. I received the lights today. Installation was easy. Product quality is definitely comparable to OEM! Looks beautiful and not aftermarket at all. I did not have to use the extra resistors. Plug and play, as simple as that. As for removing the screws, yes you can just remove the center screw only and install the lights, but removing all 3 screws allows you to install the bracket better, as it has 2 grooves that it needs to sit in.
If any one is still on the fence about this, don't be. It's as good as it gets with these Dectane lights...and at these prices, it's a great value.
If any one is still on the fence about this, don't be. It's as good as it gets with these Dectane lights...and at these prices, it's a great value.
#255
Got mine today!!!!
Here it is, all boxed up
Nicely wrapped
All wrapped up
Unwrapped and ready to install
Good-bye old OEM taillights
Hello new LED tails on the left
Both installed
Final product
Have to say it was a pretty quick and easy installation. I am impressed with the product, looks very OEM. Looks so much better than stock.
Here it is, all boxed up
Nicely wrapped
All wrapped up
Unwrapped and ready to install
Good-bye old OEM taillights
Hello new LED tails on the left
Both installed
Final product
Have to say it was a pretty quick and easy installation. I am impressed with the product, looks very OEM. Looks so much better than stock.
Silly question. What is blocking your exhaust? is it an illustion or are there some sort of flaps in there.or?