997.1 Dectane DRL led
#17
#18
Is it me or are the LED DRL's on the market (RoTEC, Dectane, etc...) exactly the same in terms of design? If so I would be willing to buy from RoTec due to their customer support and support here they have shown to us.
Thoughts?
Thoughts?
#19
I recieved my lights today, I must say they are top notch. im very impressed. For aftermarket they are goood quality items and I think they are a must interms of updating the .1 gt3 or Rs. (any early 997)
#21
Could anyone please post picture of the hack that is needed in US markets for making the LED DRL function as a daytime running light
Specifically pictures of installing TFLM03 module or equivalent (25 Euro), wiring to battery, need for (2 or 3 ?) T connectors?
Specifically pictures of installing TFLM03 module or equivalent (25 Euro), wiring to battery, need for (2 or 3 ?) T connectors?
#22
Well, I ordered my set of DRL from Frank @ ORANGE TUNING and I received them 10 working days later. (My DECTANE taillights took 5 working days when I ordered from him before and my DECTANE DRL module took 13 working days). Depends on customs I guess.
Yeserday, I finally had the time to get the DRL LED and the DECTANE DRL module installed. My friend BO from AUDIOMOBILE in Oakland, CA did the install for me and we did use a load resistor set just in case there were any problems. We didn't use any T-connectors, but he soldered every wire.
I chose a different route for my DRL function. My DRL function is on and start AND when I turn the headlights on. I can turn the DRL function off by turning the Fog light on.
I would like to personally thank TT291 for all his help to this forum on the DRL LED.
I will post pictures soon.
Yeserday, I finally had the time to get the DRL LED and the DECTANE DRL module installed. My friend BO from AUDIOMOBILE in Oakland, CA did the install for me and we did use a load resistor set just in case there were any problems. We didn't use any T-connectors, but he soldered every wire.
I chose a different route for my DRL function. My DRL function is on and start AND when I turn the headlights on. I can turn the DRL function off by turning the Fog light on.
I would like to personally thank TT291 for all his help to this forum on the DRL LED.
I will post pictures soon.
#23
nice, interesting way of installing them Jbigelow_1. I have not installed mine yet but I see they look much better on everyones pics posted so far.
cant wait to see more of your car.
cant wait to see more of your car.
#25
Everything works fine, but come to find out my passenger side middle strip city light is defective and not working, turn signal and DRL led perfect.
I really don't care for the middle strip... too many lights.
Sent e-mail to Frank @ ORANGE TUNING.... Hopefully replacement soon.
Second pic shows the middle strip not working on the passenger side while the driver side is working.
I really don't care for the middle strip... too many lights.
Sent e-mail to Frank @ ORANGE TUNING.... Hopefully replacement soon.
Second pic shows the middle strip not working on the passenger side while the driver side is working.
#26
Everything works fine, but come to find out my passenger side middle strip city light is defective and not working, turn signal and DRL led perfect.
I really don't care for the middle strip... too many lights.
Sent e-mail to Frank @ ORANGE TUNING.... Hopefully replacement soon.
Second pic shows the middle strip not working on the passenger side while the driver side is working.
I really don't care for the middle strip... too many lights.
Sent e-mail to Frank @ ORANGE TUNING.... Hopefully replacement soon.
Second pic shows the middle strip not working on the passenger side while the driver side is working.
#27
Same here. Had similar problem when installing. Turns out, connection was not seated properly.
#28
Hopefully Frank gets back to me soon.
Last edited by jbigelow_1; 12-30-2011 at 11:54 AM.
#30
Bummers. Defective unit perhaps. I would try reversing the polarity as noted by MB700. Appears Frank is also getting his LED DRL from same supplier/manufacturer as Rottec?