Ace Wheels arrived
#77
No question Hyper Silver on this wheel. For some reason it doesn't look so great in black either. I am really debating getting these in Hyper or the Ace Mesh 7 in Matte Mica Gray. But I keep coming back to wondering about a full concave wheel from likes of Rennen, ADV1, BC Forged etc. Look super cool but nearly 3x the cost!
#78
I really need to see this dark Vantage lowered on the Convex. My XKR is black and the silver Vantage doesn't quite give me the visual of how the finish would look against my lowered XKR. Drcollie, when do you plan to mount springs?
#79
......bump......just because these wheels look so much better than the ADFs that out Jag friend is lovin.....
FF
FF
#80
Duane,
Did you swap the TPMS sensors or did you have your install shop do it. Either way did you have to buy anything to swap them out to the new wheels. New seals or something similar to that?
Did you swap the TPMS sensors or did you have your install shop do it. Either way did you have to buy anything to swap them out to the new wheels. New seals or something similar to that?
#81
Just swapped them over (TPS), nothing fancy.
I'm not planning on lowering the car, I'm scraping driveway aprons as it is and don't one it one bit stiffer. Not willing to pay the piper for the cool look.
I'm not planning on lowering the car, I'm scraping driveway aprons as it is and don't one it one bit stiffer. Not willing to pay the piper for the cool look.
#82
Ace wheel is having a $ 200 off special right now for up to (5) sets...(19's shown on my car in photo, the deal is for 20")
Coupon Code
MS0513
Get $200 off when you purchased on-line for one set of stagger Matte Silver finish CONVEX 20 inches wheel in combination of 2pcs of 20x9.0 and 2pcs of 20x10.5.
Only 5 sets will be applied. First come first serves.
Coupon Code
MS0513
Get $200 off when you purchased on-line for one set of stagger Matte Silver finish CONVEX 20 inches wheel in combination of 2pcs of 20x9.0 and 2pcs of 20x10.5.
Only 5 sets will be applied. First come first serves.
Last edited by drcollie; 05-19-2013 at 10:06 PM.
#85
Sorry to bring this thread back to the top but I just ordered a set of Mesh 7's for my 05 DB9 and was curious if I would also need new lugs as well? I probably do since the vantage and DB9 share some of the same suspension parts. Would the part# B-D5X2 given in this thread be what I would need? I'm hoping my rear wheels are not as aggressive in the rear but we will see.
Thanks guys!
Dan
Thanks guys!
Dan
Last edited by dan87951; 06-26-2013 at 07:17 AM.
#86
Offset
Does anyone know for sure that 38/45 is the right offset on these wheels in 19 inch? I just pulled the trigger on a set and Ace seems to think that those numbers are incorrect but can't find the original order (Dr. Colie's order is too old). I want to make sure that spacers aren't needed and that they don't stick out too far. Any help would be greatly appreciated. Thanks.
#87
It's possible you missed this but OP posted a copy of his original order receipt:
"Product ID: ace-d7041985hsace-d7041910hs
Product Name: - Staggered Full Set - <br>(2) 19x8.5 Ace Alloy Convex Hypersilver w/Machined Accent<br>(2) 19x10 Ace Alloy Convex Hypersilver w/Machined Accent
Quantity: 1
Unit Price: $1,230.00
Front Tires : Click Here to Add 2 Front Tires (Optional)
Rear Tires : Click Here to Add 2 Rear Tires (Optional)
Vehicle Fitment :
<b>Front Wheels</b> Universal 5 Lug - Offset: 38 mm
<b>Rear Wheels</b> Universal 5 Lug Offset: 45 mm"
"Product ID: ace-d7041985hsace-d7041910hs
Product Name: - Staggered Full Set - <br>(2) 19x8.5 Ace Alloy Convex Hypersilver w/Machined Accent<br>(2) 19x10 Ace Alloy Convex Hypersilver w/Machined Accent
Quantity: 1
Unit Price: $1,230.00
Front Tires : Click Here to Add 2 Front Tires (Optional)
Rear Tires : Click Here to Add 2 Rear Tires (Optional)
Vehicle Fitment :
<b>Front Wheels</b> Universal 5 Lug - Offset: 38 mm
<b>Rear Wheels</b> Universal 5 Lug Offset: 45 mm"
Does anyone know for sure that 38/45 is the right offset on these wheels in 19 inch? I just pulled the trigger on a set and Ace seems to think that those numbers are incorrect but can't find the original order (Dr. Colie's order is too old). I want to make sure that spacers aren't needed and that they don't stick out too far. Any help would be greatly appreciated. Thanks.
#89
you could pm 007vantage, I think he provided the offsets to OP.
#90
here are the wheel offset posts by DoubleLow7. they might help you
https://www.6speedonline.com/forums/...ml#post4101752
https://www.6speedonline.com/forums/...at-offset.html
https://www.6speedonline.com/forums/...ml#post4101752
https://www.6speedonline.com/forums/...at-offset.html