Chrome seat switch covers
#16
I will try to post more photos over the week end,I feel they improve the interior for very little money and as it is only attached by double sided tape it can be removed easily.Each to his own .
#17
I received the set ordered earlier this week. For what it is (remember they cost around 30 bucks) I think they look great.
Make sure that when you fit them (they come with 3M double sided tape) you put the side down were it was cut from the mold; a little edge-imperfection can spoil the result.
I know, I know a crappy grainy picture at night but I can tell you it's a great upgrade from the standard black switch which goes particularly nice with the solid aluminium *****.
Make sure that when you fit them (they come with 3M double sided tape) you put the side down were it was cut from the mold; a little edge-imperfection can spoil the result.
I know, I know a crappy grainy picture at night but I can tell you it's a great upgrade from the standard black switch which goes particularly nice with the solid aluminium *****.
#18
I received the set ordered earlier this week. For what it is (remember they cost around 30 bucks) I think they look great.
Make sure that when you fit them (they come with 3M double sided tape) you put the side down were it was cut from the mold; a little edge-imperfection can spoil the result.
I know, I know a crappy grainy picture at night but I can tell you it's a great upgrade from the standard black switch which goes particularly nice with the solid aluminium *****.
Make sure that when you fit them (they come with 3M double sided tape) you put the side down were it was cut from the mold; a little edge-imperfection can spoil the result.
I know, I know a crappy grainy picture at night but I can tell you it's a great upgrade from the standard black switch which goes particularly nice with the solid aluminium *****.
#21
I am working on a upgraded switch set, I am making the buttons in machined alloy and the black plastic coated with faux carbon fiber. Pain is getting the switch apart (and back together) if it works out I will maybe make several sets and offer them on an exchange basis with a core charge. Might also do one in all carbon fiber.
#22
I am working on a upgraded switch set, I am making the buttons in machined alloy and the black plastic coated with faux carbon fiber. Pain is getting the switch apart (and back together) if it works out I will maybe make several sets and offer them on an exchange basis with a core charge. Might also do one in all carbon fiber.
Don't use that fake carbon bs. Leave it black. This isn't a honda. I would be interested but not with the fake carbon backing.
#23
I am just prototyping for now and will use the Hydrograpics to get a feel. I have a guy who can make an real CF insert if I like the look, Also thought about doing engine turned alloy insert. You correct in that it's not a Honda, shame they used Volvo parts in the first place, but they seemed to heave learned now, looking forward to a new DB11
#25
I am just prototyping for now and will use the Hydrograpics to get a feel. I have a guy who can make an real CF insert if I like the look, Also thought about doing engine turned alloy insert. You correct in that it's not a Honda, shame they used Volvo parts in the first place, but they seemed to heave learned now, looking forward to a new DB11
I'd leave the backplate black like OEM. From a resale stand point you will capture more interest with the OEM look.
#26
Maybe I thought your comments about it not being a Honda was directed at the part content, not the habit of some young Honda driver to adorn their cars with faux junk and bling :-)
However I am amazed that cars costing North of $180k use components from cars costing $30-50k. When Ulrich Bez took over he was against parts bins sharing but Ford brass over-ruled him. When VW Group took over at Bentley they realized that the tactile and visual elements of the car (regardless of what they connect to) should be unique.
However I am amazed that cars costing North of $180k use components from cars costing $30-50k. When Ulrich Bez took over he was against parts bins sharing but Ford brass over-ruled him. When VW Group took over at Bentley they realized that the tactile and visual elements of the car (regardless of what they connect to) should be unique.
#28
This. I bought some on eBay and have them sitting over the existing switches now, but not taped on yet. I am torn. I like it better than the original but still don't like the size of them in general. Original is ugly, but unobtrusive.. New ones less ugly but stand out more..
#29
Seat Switch Upgrade
I agree I have a set and they look better but do stand out, I am going to get them coated in carbon-fiber dip and see what that looks like, I had an intention to do an entire switch is CF...anything better than the plain plastic. Just have to find a spare switch to pull apart and see if possible.