2011 Audi S4 APR Pulley, Stage II Intake, ECU Upgrade and Rennline Pedals
#1
2011 Audi S4 APR Pulley, Stage II Intake, ECU Upgrade and Rennline Pedals
Morning everyone, stopping by to show everyone this S4 that we had in the shop last week. It came to us in stock form ready to be transformed into something much better.
Parts Installed List:
APR Pulley Upgrade
APR Stage 2+ ECU Upgrade
Carbonio Stage 1&2 Intake
APR Badges
Rennline Pedal Set
On this S4 we started out by installing the upgraded supercharger pulley and to do that the Audi had to be put into service mode.
All the parts to be installed
New pulley and belt installed
After the new pulley and belt were installed the car was taken out of service mode, however instead of the factory intake being re-installed the Carbonio Stage 1&2 Intake kits were used in its place.
All back together and ready for the next stage.
Next, to handle the extra boost from the new pulley and the extra air from the Carbonio intake, the factory ECU was flashed with APR Stage 2+ software. This software will adjust fuel trims and ignition timing to boost the performance up an extra 80ft-lbs and 108hp at all four wheels!
After all of these APR parts were installed the customer wanted the cars cruising next to him to know that this was an S4 not to be messed with. To do this a set of stage 2+ APR Badges were installed on the deck lid and both front fenders.
After all the APR upgrades were completed the last little touch was added inside the car via a set of Rennline Pedals.
All installed
After everything was finished up it was time to take it out and have some fun.
Click Here to see the complete build with 47 images of this build.
Parts Installed List:
APR Pulley Upgrade
APR Stage 2+ ECU Upgrade
Carbonio Stage 1&2 Intake
APR Badges
Rennline Pedal Set
On this S4 we started out by installing the upgraded supercharger pulley and to do that the Audi had to be put into service mode.
All the parts to be installed
New pulley and belt installed
After the new pulley and belt were installed the car was taken out of service mode, however instead of the factory intake being re-installed the Carbonio Stage 1&2 Intake kits were used in its place.
All back together and ready for the next stage.
Next, to handle the extra boost from the new pulley and the extra air from the Carbonio intake, the factory ECU was flashed with APR Stage 2+ software. This software will adjust fuel trims and ignition timing to boost the performance up an extra 80ft-lbs and 108hp at all four wheels!
After all of these APR parts were installed the customer wanted the cars cruising next to him to know that this was an S4 not to be messed with. To do this a set of stage 2+ APR Badges were installed on the deck lid and both front fenders.
After all the APR upgrades were completed the last little touch was added inside the car via a set of Rennline Pedals.
All installed
After everything was finished up it was time to take it out and have some fun.
Click Here to see the complete build with 47 images of this build.
#2
"This software will adjust fuel trims and ignition timing to boost the performance up an extra 80ft-lbs and 108hp at all four wheels!
Thats frigin insane! Whats the damage on the three mods? Pulley, intake and software flash?
Thread
Thread Starter
Forum
Replies
Last Post
eclip5e
Automobiles For Sale
8
04-28-2022 12:38 AM
ECS Tuning - VW
VW Vendor Classifieds
0
08-21-2015 09:11 AM
ECS Tuning - VW
VW Vendor Classifieds
1
08-19-2015 11:08 AM