1997 Supra for sale
#1
1997 Supra for sale
I'm posting this for a friend. If you're interested or have questions, please email him at pineapple.monkey@gmail.com
--------------------------------------
1997 Twin Turbo 6 speed 850rwhp - Chassis and body has never been hit or
painted in any fashion. Has a tick over 45,000 miles on her.
SP T6 racing manifold with a step plate for T4 GT4508R ($3,000 turbo
alone!). The manifold is amazing, it's a piece SP made a few copies of
with bigger runners that is stepped down and back up to equalize flow,
even on a big turbo it will hold 12psi of boost at it's lowest
setting. Other big turbos surge, this manifold will NOT. Also has a
Tial 44mm wastegate
Four inch downpipe to four inch midpipe.
Five inch intake with K&N filter
Greddy Profec B Spec II boost controller.
HKS 280 cams with crower springs and retainers. The head was also
gasket matched at the same time. Along with the installation of ARP
head studs.
SP Racing intake manifold with Accufab throttle body.
SP Racing Fuel system with dual walbros, 1000cc injectors, Aeromotive
regulator with pressure gauge.
4 inch core intercooler, this was originally made by a company called
ADFX, it flows a tad better then a Greddy 4 Row. Nummy
AEM standalone
HKS DLI
RPS Carbon Carbon clutch with aluminum flywheel.
Tial blow off valve
Boost logic 4" exhaust
Koyo Radiator w/ Hard upper radiator pipe
SP Racing Timing belt tensioner along with a new OEM timing belt
KYB with Tein springs
CCW Classics also with under 200 miles on them with BFG KDW2 (fronts)
and BFG drags in the rear. Zero burnouts or anything on them.
AP Engineering Shifter bushings along with new bushings inside the shifter.
TRD 10K rpm tach.
All wiring has been gone over to insure age has not corrupted them, I
have re-wrapped all insulated wiring to protect it as well. Wiring has
also been moved and tucked to make the engine bay cleaner. Car drives
like factory.
$60,000
http://i73.photobucket.com/albums/i2...m/100_1269.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/20070810_IMG_00031.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/20070810_IMG_00013.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/l_afb9c8d2027aa77cfe33f6cfdd17ad66.jpg
I have a factory spark plug cover. This was made to honor my friend
who passed away overseas, he was in the Marines, it is called Marpat.
USMCs newest form of Camoflauge.
--------------------------------------
1997 Twin Turbo 6 speed 850rwhp - Chassis and body has never been hit or
painted in any fashion. Has a tick over 45,000 miles on her.
SP T6 racing manifold with a step plate for T4 GT4508R ($3,000 turbo
alone!). The manifold is amazing, it's a piece SP made a few copies of
with bigger runners that is stepped down and back up to equalize flow,
even on a big turbo it will hold 12psi of boost at it's lowest
setting. Other big turbos surge, this manifold will NOT. Also has a
Tial 44mm wastegate
Four inch downpipe to four inch midpipe.
Five inch intake with K&N filter
Greddy Profec B Spec II boost controller.
HKS 280 cams with crower springs and retainers. The head was also
gasket matched at the same time. Along with the installation of ARP
head studs.
SP Racing intake manifold with Accufab throttle body.
SP Racing Fuel system with dual walbros, 1000cc injectors, Aeromotive
regulator with pressure gauge.
4 inch core intercooler, this was originally made by a company called
ADFX, it flows a tad better then a Greddy 4 Row. Nummy
AEM standalone
HKS DLI
RPS Carbon Carbon clutch with aluminum flywheel.
Tial blow off valve
Boost logic 4" exhaust
Koyo Radiator w/ Hard upper radiator pipe
SP Racing Timing belt tensioner along with a new OEM timing belt
KYB with Tein springs
CCW Classics also with under 200 miles on them with BFG KDW2 (fronts)
and BFG drags in the rear. Zero burnouts or anything on them.
AP Engineering Shifter bushings along with new bushings inside the shifter.
TRD 10K rpm tach.
All wiring has been gone over to insure age has not corrupted them, I
have re-wrapped all insulated wiring to protect it as well. Wiring has
also been moved and tucked to make the engine bay cleaner. Car drives
like factory.
$60,000
http://i73.photobucket.com/albums/i2...m/100_1269.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/20070810_IMG_00031.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/20070810_IMG_00013.jpg
http://i73.photobucket.com/albums/i236/PineappleMonkey/my%20dream/l_afb9c8d2027aa77cfe33f6cfdd17ad66.jpg
I have a factory spark plug cover. This was made to honor my friend
who passed away overseas, he was in the Marines, it is called Marpat.
USMCs newest form of Camoflauge.
Last edited by kayman; 11-17-2007 at 10:52 AM.
#5
Love the Marpat, sorry to hear about your friend. My cousin's AH-53 went down in Feb 05 and lost all the entire crew. He happened to have his wings pulled that week for insubordination, and dodged the bullet
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
2lflat4
Automotive Parts & Accessories For Sale/Wanted
2
11-18-2019 05:05 PM
3WDistributing
Automotive Parts & Accessories For Sale/Wanted
31
10-27-2017 01:26 PM
LiquidElephant
Automobiles For Sale
3
08-27-2015 06:17 PM