Exomotive Exocet and enclosed trailer.
#1
Exomotive Exocet and enclosed trailer.
Year: 2016
Make: Mazda
Model: MX-5 Miata
Price: $20000
Mileage: 110000
Color: Red/Grey
Private or Dealer Listing: Private Listing
Location (State): NJ
Transmission: Manual
Drivetrain: Rear Wheel Drive
Some things came up so its time to sell my Exocet and enclosed trailer.
I am a motivated seller. Located in Red Bank,NJ 07701
Package price $20,000
Email me with any questions V.Spinnato1@gmail.com
Link for pictures during build.
https://www.facebook.com/media/set/…
Car is complete and runs flawless. Not sure miles on the completed car but donor had 99k miles and all service records up to date. I built the car to be driven and driven hard and it has never skipped a beat, has a few scuffs and tire marks from track days but all should clean off. Oil/filter changed every 2/3 track days.
Car is not street legal but should have all requirements to start the process, will include donor title and 2nd title with vin plates. Car has been driven on the streets and has roughly 150-200 street miles.
Any questions ask away.
Lap times with me driving on street tires
NJMP Lightning-1:24.88
NJMP Thunderbolt-1:43.04
Lime Rock Park-1:09.85
Watkins Glen-2:31.60
NYST-1:50.50
With a better driver and tires car will be faster but it is extremely consistant in its current setup.
The trailer is a 2017 Look Element, size is 16'x7'x6'6", has tandem 3500lbs Lippert axle it has a ramp door with a flap, roof vent, side door, exterior led lights, E-Tracks spanning the full length,2 5gallon fuel can holder front of trailer, electric brakes and a spare tire.
Exocet Race Chassis #126 Signal Red W/APR wing mounts, suspension spacers, wiring tray
Donor car 1993 1.6l
Engine/Drivetrain
Timing belt/water pump and gaskets (10/16)
Carbon Miata Silicone hoses
Flyin Miata Lower Rad hose
CX Racing Rad & Fans
Topspeed Auto Header(4-2-1)
NGK Plug wires
Custom intake W/ Spector filter
OEM Clutch W/ 7lbs Fandanzda flywheel
IRP Billet Short Shifter
4.10 Torsen
Exomotive Fuel Line Kit
AWR Motor Mounts(70 Durometer)
Custom Exhaust with Magnaflow Cat and Borla Muffler
Chasebays Coolant Overflow
Moroso AOS
Suspension/Brakes/Steering/Wheels/Tires
95% of suspension hardware was replaced with new hardware bought from Mazda
949Racing Xdias Dual Springs W/Billet Tophats (450/300 spring rates, installed 3/5/17)
Full Energy Suspension Bushing Kit
Racing Beat tubular front sway bar
949Racing Adjustable Endlinks
1.8L Miata brakes
Carbotech Rotors(XP10/XP8 40% life left)
Blank Rotors
Exomotive Brake/clutch line kit
Wilwood Prop Valve
ARP Extended Studs
949Racing Lug Nuts
Front Hub/Bearing Assembly
Rear Hub/Bearing Assembly
Moog Upper/Lower Balljoints
NB Steering rack
V8 Roadsters steering rack bushings
Traklite Holeshot 15x8 +0
Hankoon RS4(3 track days mounted 10/6/17)
949Racing Valve Stems
NB Front & Rear Subframes (powder coated to match frame)
NB Control Arms, front and rear uprights (powder coated to match body work)
Interior
2 Sparco Sprints (black)
PCI fixed seat mount(drive side)
Planted universal seat bracket(passenger side)
2 Racequip Camlock harnesses
Driven Steering wheel
NRG Quick release/short hub with spacer
Flyin Miata Pedal kit
Racequip Shifter Boot
Tomei Shift **** included with stock shifter
Longacher Rearview Mirror
Odyssey PC680 Battery with posts in battery box
Exterior Slate Grey Body work
APR Carbon Mirrors
Flyin Miata Side Panel
Photon Projector Combined Hi/Low Beam Headlight
3 in 1 Tail Lights
Motorcycle Turn Signals
LED Side Marker
Hella Supertones
Aerocatch and Quick-Latch
LED plate Brakcet
Extras
14" tall 1/4" thick lexan windshield
I am a motivated seller. Located in Red Bank,NJ 07701
Package price $20,000
Email me with any questions V.Spinnato1@gmail.com
Link for pictures during build.
https://www.facebook.com/media/set/…
Car is complete and runs flawless. Not sure miles on the completed car but donor had 99k miles and all service records up to date. I built the car to be driven and driven hard and it has never skipped a beat, has a few scuffs and tire marks from track days but all should clean off. Oil/filter changed every 2/3 track days.
Car is not street legal but should have all requirements to start the process, will include donor title and 2nd title with vin plates. Car has been driven on the streets and has roughly 150-200 street miles.
Any questions ask away.
Lap times with me driving on street tires
NJMP Lightning-1:24.88
NJMP Thunderbolt-1:43.04
Lime Rock Park-1:09.85
Watkins Glen-2:31.60
NYST-1:50.50
With a better driver and tires car will be faster but it is extremely consistant in its current setup.
The trailer is a 2017 Look Element, size is 16'x7'x6'6", has tandem 3500lbs Lippert axle it has a ramp door with a flap, roof vent, side door, exterior led lights, E-Tracks spanning the full length,2 5gallon fuel can holder front of trailer, electric brakes and a spare tire.
Exocet Race Chassis #126 Signal Red W/APR wing mounts, suspension spacers, wiring tray
Donor car 1993 1.6l
Engine/Drivetrain
Timing belt/water pump and gaskets (10/16)
Carbon Miata Silicone hoses
Flyin Miata Lower Rad hose
CX Racing Rad & Fans
Topspeed Auto Header(4-2-1)
NGK Plug wires
Custom intake W/ Spector filter
OEM Clutch W/ 7lbs Fandanzda flywheel
IRP Billet Short Shifter
4.10 Torsen
Exomotive Fuel Line Kit
AWR Motor Mounts(70 Durometer)
Custom Exhaust with Magnaflow Cat and Borla Muffler
Chasebays Coolant Overflow
Moroso AOS
Suspension/Brakes/Steering/Wheels/Tires
95% of suspension hardware was replaced with new hardware bought from Mazda
949Racing Xdias Dual Springs W/Billet Tophats (450/300 spring rates, installed 3/5/17)
Full Energy Suspension Bushing Kit
Racing Beat tubular front sway bar
949Racing Adjustable Endlinks
1.8L Miata brakes
Carbotech Rotors(XP10/XP8 40% life left)
Blank Rotors
Exomotive Brake/clutch line kit
Wilwood Prop Valve
ARP Extended Studs
949Racing Lug Nuts
Front Hub/Bearing Assembly
Rear Hub/Bearing Assembly
Moog Upper/Lower Balljoints
NB Steering rack
V8 Roadsters steering rack bushings
Traklite Holeshot 15x8 +0
Hankoon RS4(3 track days mounted 10/6/17)
949Racing Valve Stems
NB Front & Rear Subframes (powder coated to match frame)
NB Control Arms, front and rear uprights (powder coated to match body work)
Interior
2 Sparco Sprints (black)
PCI fixed seat mount(drive side)
Planted universal seat bracket(passenger side)
2 Racequip Camlock harnesses
Driven Steering wheel
NRG Quick release/short hub with spacer
Flyin Miata Pedal kit
Racequip Shifter Boot
Tomei Shift **** included with stock shifter
Longacher Rearview Mirror
Odyssey PC680 Battery with posts in battery box
Exterior Slate Grey Body work
APR Carbon Mirrors
Flyin Miata Side Panel
Photon Projector Combined Hi/Low Beam Headlight
3 in 1 Tail Lights
Motorcycle Turn Signals
LED Side Marker
Hella Supertones
Aerocatch and Quick-Latch
LED plate Brakcet
Extras
14" tall 1/4" thick lexan windshield
Last edited by Vin_Spin; 07-10-2018 at 09:33 AM.
#3
Never had it weighed dry but it was 1620lbs with a full tank
#7
Shoot me an email with an offer, price is negotiable. V.spinnato1@gmail.com I'm free tomorrow and Saturday if you'd like to see it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ace10
Merchandise For Sale / Wanted
2
03-11-2018 06:46 PM
GetBoosted
996 Turbo / GT2
20
11-26-2017 11:32 PM
blackboxMS
Automobiles For Sale
8
10-28-2015 06:59 PM