FS: BBS LM's 19's
#1
FS: BBS LM's 19's
this thread has moderator approval....VSE Chuck
If interested. Email me at DTMVDUB@hotmail.com
$2,500 - OBO Will ship at buyer's expense & Pay Pal fees.
Located in Long Branch, NJ 07740.
More pics: http://photobucket.com/BBS_LM
The specs are:
Bolt Pattern: 5x130
Fronts: 19x8.5 Part#LM116
ET: 55mm
Tires: Falken Azenis ST115 235/35/19. Has good rubber, enough for a season.
Rears: 19x10 Part#LM117
ET: 62mm
Tires: Kuhmo Ecstas 275/30/19. should be replaced. Have camber wear.
Condition: The wheels are straight, no bends and in excellent shape, with several light surface blemishes.
1 19x10 wheel has curb rash, the other 19x10 wheel has 1.5" of very light rash. 1 19x8.5 wheel has a blemish on the back of outer lip. Not visible from the front.
If interested. Email me at DTMVDUB@hotmail.com
$2,500 - OBO Will ship at buyer's expense & Pay Pal fees.
Located in Long Branch, NJ 07740.
More pics: http://photobucket.com/BBS_LM
The specs are:
Bolt Pattern: 5x130
Fronts: 19x8.5 Part#LM116
ET: 55mm
Tires: Falken Azenis ST115 235/35/19. Has good rubber, enough for a season.
Rears: 19x10 Part#LM117
ET: 62mm
Tires: Kuhmo Ecstas 275/30/19. should be replaced. Have camber wear.
Condition: The wheels are straight, no bends and in excellent shape, with several light surface blemishes.
1 19x10 wheel has curb rash, the other 19x10 wheel has 1.5" of very light rash. 1 19x8.5 wheel has a blemish on the back of outer lip. Not visible from the front.
Last edited by AE1867; 02-14-2009 at 05:55 AM. Reason: add mod approval
#4
Thanks.
Actually, I bought them this way with the intention of having them refinished/customized.
Had I curbed my own, painful would've been an understatement.
If they don't sell they'll be getting polished lips and painted centers...maybe gold bolts.
Actually, I bought them this way with the intention of having them refinished/customized.
Had I curbed my own, painful would've been an understatement.
If they don't sell they'll be getting polished lips and painted centers...maybe gold bolts.
Last edited by AE1867; 01-10-2009 at 07:53 PM.
#7
Yes. While the LMs are actually staggered, the lips aren't. There are some rare exceptions out there, most likely custom ordered.
Trending Topics
#10
OK. Was for a Boxster. Would they fit a 997S? A 993? I have some buddies that I can talk to to see if we can move them for you. I guess I need to do some research into the bolt patterns for each of their cars.
#11
Was for a Boxster. Would they fit a 997S? A 993? I have some buddies that I can talk to to see if we can move them for you. I guess I need to do some research into the bolt patterns for each of their cars.
A 993T can run an 18x8(F) ET55 & 18x10(R) ET45. I read on another forum that the bentley manual specifies an 65mm ET can be used on the rear. 19's might be a tight fit on these models. Anyone interested would need to look into it. Spacers might be needed.
As for the 997. I know they'll fit perfectly. (Some correct me if I'm wrong.) But...there's a "but".
For a standard 997 with 18" wheels, this is great upgrade.
For a 997S with OEM 19" wheels it will be a personal choice. The 997S comes with 19x11(R). They can still run a 19x10 perfectly, but the owner will be giving up an 1" of metal on each side. They can compensate for the loss with a small spacer, thereby increasing stability, turn in, and steering feedback. Again, this will be a personal choice a 997 owner would need to make.
Look at it like this...my LMs have a couple of blemishes but are a fantastic value at my selling price. For another $200 the little rash can be removed and lips polished to a mirror finish. Powder coded centers is much more. So for less than $3k someone can get a set of $5K wheels, and one of the best on the market.
Last edited by AE1867; 02-09-2009 at 09:36 PM.
#12
I can have them refinished for the buyer. Rash removed, lips polished, whole wheel polished, powder coated centers, etc.
#13
And yes, these will fit a 993.