Anyone know how to remove Dashboard
#2
11-13-2011, 05:31 AM
The infotainment panel is delicate and great care should be taken when removing and refitting this item.
Use front end hook special tool [3370] to unclip the indirect air grille (1). (see TOOL pdf attached below and this too, is ONLY needed if you need to remove the top air grille)
Carefully pull the panel at the top away from its retaining clips (No tool is required for this procedure).
Place the panel on a suitable protective surface.
See CENTER pdf below)
Installation:
Refit is reverse of removal procedure.
Use front end hook special tool [3370] to unclip the indirect air grille (1). (see TOOL pdf attached below and this too, is ONLY needed if you need to remove the top air grille)
Carefully pull the panel at the top away from its retaining clips (No tool is required for this procedure).
Place the panel on a suitable protective surface.
See CENTER pdf below)
Installation:
Refit is reverse of removal procedure.
Last edited by stevenrmusic; 11-13-2011 at 05:35 AM.
#3
11-13-2011, 05:34 AM
Drivers side facia panel - To remove and fit
Note:No special tools are required to remove the drivers side facia panel.
Using the column adjustment switch, position the steering wheel so that it is at it's most extended and lowered position.
Holding the facia panel as shown in the illustration below. Pull outwards to disengage the locators. Place the panel on a suitable protective surface.
See DRIVERSIDE pdf below.
Installation:
Ensure any clips damaged during removal procedure are renewed prior to installation.
Note:No special tools are required to remove the drivers side facia panel.
Using the column adjustment switch, position the steering wheel so that it is at it's most extended and lowered position.
Holding the facia panel as shown in the illustration below. Pull outwards to disengage the locators. Place the panel on a suitable protective surface.
See DRIVERSIDE pdf below.
Installation:
Ensure any clips damaged during removal procedure are renewed prior to installation.
#4
11-13-2011, 08:43 AM
The infotainment panel is delicate and great care should be taken when removing and refitting this item.
Use front end hook special tool [3370] to unclip the indirect air grille (1). (see TOOL pdf attached below and this too, is ONLY needed if you need to remove the top air grille)
Carefully pull the panel at the top away from its retaining clips (No tool is required for this procedure).
Place the panel on a suitable protective surface.
See CENTER pdf below)
Installation:
Refit is reverse of removal procedure.
Use front end hook special tool [3370] to unclip the indirect air grille (1). (see TOOL pdf attached below and this too, is ONLY needed if you need to remove the top air grille)
Carefully pull the panel at the top away from its retaining clips (No tool is required for this procedure).
Place the panel on a suitable protective surface.
See CENTER pdf below)
Installation:
Refit is reverse of removal procedure.
thank so much.you are really expert .. is that pdf from repair manual?
#5
11-13-2011, 09:04 AM
The pdf and text is from:
http://www.bentleytechinfo.com/BY001...v1/default.asp
Of course ALWAYS be careful and i take no liability if things go wrong. The images and text are those supplied by Bentley and perhaps assumes the technician has already completed proper training. As alwasy, when in doubt it may be best to simply let a professional complete the task at hand.
http://www.bentleytechinfo.com/BY001...v1/default.asp
Of course ALWAYS be careful and i take no liability if things go wrong. The images and text are those supplied by Bentley and perhaps assumes the technician has already completed proper training. As alwasy, when in doubt it may be best to simply let a professional complete the task at hand.
Last edited by stevenrmusic; 11-13-2011 at 09:08 AM.
#6
04-24-2020, 05:48 AM
Dashboard removal ??
Bentley gt Dashboard removal??anybody no the procedure ?? Heater box needs replacing due to a leak
#7
04-24-2020, 04:09 PM
The pdf and text is from:
http://www.bentleytechinfo.com/BY001...v1/default.asp
Of course ALWAYS be careful and i take no liability if things go wrong. The images and text are those supplied by Bentley and perhaps assumes the technician has already completed proper training. As alwasy, when in doubt it may be best to simply let a professional complete the task at hand.
http://www.bentleytechinfo.com/BY001...v1/default.asp
Of course ALWAYS be careful and i take no liability if things go wrong. The images and text are those supplied by Bentley and perhaps assumes the technician has already completed proper training. As alwasy, when in doubt it may be best to simply let a professional complete the task at hand.
Server Error
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
Trending Topics
#8
04-24-2020, 05:21 PM
Administrator
Join Date: Jul 2014
Location: Montgomery NJ
Posts: 3,417
Rep Power: 1002 
What kind of leak do you have, a coolant leak affecting the heating, as in a heater core leak, a freon leak in the AC evaporator coil, or a condensate drain leak ?
I do not have it written out step by step, but if you do indeed need to pull the HVAC suitcase for any repairs, it's a very big job, I can walk you through it, but you would need to be patient, this is not a few hour job...
You can see my pictures staring around post number 17 in my rebuild thread.
https://www.6speedonline.com/forums/...-pictures.html
...
Johnny
Thread
Thread Starter
Forum
Replies
Last Post
