Does anyone know if the TPMS dash warning light can be turned off, i.e disable the system? I know you can turn the system off via the infotainment but the dash warning light is still present. My car is a '04 Continental GT RHD

 

See post #51 located here: https://www.6speedonline.com/forums/...-thread-4.html

 

Has anyone tried this fix?.. Can anyone recommend the Scanner.. Help with a step by step? Anyone in or near London that can turn the damn warning light off .. I am happy to pay them to do it!!

 

First, pull the fuse #11 from the fuse box located in the driver side trunk panel on top of the battery.

Next, buy the Vag can bus scanner V202.

go to menu #19 from the scanner, hit coding, type in 0000006.

This worked perfectly for my 04 GT
Paul

 

Thanks for that.. where is the best place to buy the scanner, approx cost?.. and where is the socket that it plugs into located... any help would be appreciated...!
cheers

 

I got mine off ebay, right around 100 bucks US. Shipped from China and arrived in 21 days. It plugs into a port near the drivers feet. On left hand drive car it is on the panel on the left side, on a right hand drive it might be reversed.
Paul

 

excellent thanks again Paul... I have spent a fortune on this system and it keeps going wrong... Bentley have just quoted me £1800 to repair the system... I say 'repair' .. they just replace all of the sensors and the control module. I have been looking for this fix for a long time!! Jamie

 

is it this one?...
http://www.ebay.co.uk/itm/VAG-PRO-Co...item258a5d6ba6

 

Yes. V-checker 202 is what I have.

 

So for 60 pounds you will have no more warning lights. You will have to remember to check your air pressure in your tires once in a while though. Good trade off in my opinion.
Paul

 

It's a no brainer!! The beeping on startup drives me mad....

 

wow.so easy to fix.thank you

 

Hi Paul... I have ordered the scanner, but the supplier has told me that it cannot be used for programming and that it only reads codes?

Howe do I type in 0000006?

cheers

Jamie

Can you send me a picture of your scanner please?

 

If you get the V-checker 202 you can do much more than just read the codes, you can clear them and change some values.
Paul

 

I purchased a V Checker V202 but the connector does not fit my OBD2 port. Has anyone else had this problem? I contacted the seller and they acknowledged that they had a problem with their manufacturer. I wonder if someone can recommend a different OBD2 device that will work the same way as the V202. I want to turn off my TPMS.


Thanks you all for any help here. My 2005 GT was sold in US, if that makes a difference.