This guy is amazing !!!!He has resuected my 06 flying spur with 181,000 miles on it (I had it since 13,000 miles brand new) long story short my trasmission went out after a flush and filter change @ 180,000. I purchased a 07 motor and transmission just plug and play even harrnes, from luke of alpine preformance. I drove to like miami flordia to pick up engine and trans and drove it back to va.I then researched who could complete this job... I sort of interviewed many parts changers but not many real techs. Jason is a master tech for bentley and lamborghini. he used to work for the dealership before starting his own business.


I chose jason to do the job and change vac hoses I had seen his videos on youtube. i rented a f350 and a car trailer and took my car to valley stream Ny (long island) when i arrived there was many bentleys and a lamborghini
a aston martin belong to a famous person. as the work began he sent me videos of his work and comunicated with me daily i will post some pictures and videos. he has posted 2 of my car on youtube.. he has helped people on this forum.


Call Jason of giannetti perfomance 516 398-2016. He is very honest and fair and a genius. Btw my engine was not just a engine swap, that would be easy for him he made a harness as it different from 06 to 07.. Thank you Jason you will be my tech for life!!!!!

 

Gene,
Your Bentley Flying Spur has 181k miles on it and its in Amazing condition, you really took great care of that car over the years. Anyone who was to see it would never be able to guess the mileage. But age does take a toll on the plastic vacuum lines and electrical connectors. I used the 2007 engine harness in your car but added the circuit for the thermostat into the master DME (BANK 1) that circuit was only used up to 2006 cars and eliminated in 2007 and up cars.
I am sharing a link to the youtube video on your car that shows the vacuum line upgrade.

 

I concur with Gene !!


Jason is the MAN, and a great person to hang with and talk shop, a genuine good person !


You still want those trans parts Gene... LOL


See you soon Jason, or maybe I'll just call you at all hours with questions.....


.

 

He even fixed my suspension issue,did boots ,Tierods, new oil dip stick, changed radiator.used all new bolts as they are torque to yield, mounted two new tire and align. donated two barely used rotors as mine were in bad shape, installed new lines and hoses.




Im set on parts for now. my car drive like new!!!!! Im in Love with it Again!!!


Maybe the mirror switch ? Lol Is your car completed yet?

 

Thanks Johnny,
From your first post I seen on here I knew you were incredibly talented with lots of automotive experience. You are a great value on this forum because of your dedication and drive to find solutions for many problems.Lots of respect for you bro. I made you a set of vacuum lines at no charge anytime you are in the area swing by.

 

I've got you mirror switch... LOL


I am still working on mine, I could not help myself, I picked up 4 crates, 2 engines and 2 transmissions involved in a UPS truck crash, but no damage to the units at all, all the crates are in one piece except for the bottom of a trans crate, but the trans is fine with no damage, I have been doing a lot of research checking with Bentley in Crewe with all ser # from each piece to verify what I got, plus calling Jason and brainstorming together, also Jason is making all my line sets needed !


So now I have 5 engines and 3 transmissions, one engine is a late 2014- early 2015 "CVA" that will be going in my vehicle, I am just taking my time and going over with Jason all the aspects of the wiring and some sensor plug size issues, I did not want to destroy a brand new 2014-15 engine harness with pig tailing, but was thinking about it and Jason basically said pull the whole harness off and get to work....


So now after reading Jason's comment on the 07 harness, I will be calling you Jason, do I use the 05 and change out the cam sensors on the 14 to 05 size, or do I take a harness from the crate 07 and use that, but then devaluing the 07 ???

 

Thank YOU Jason !!!


But this time we do lunch together !


Be in touch soon..

 

There is absolutely no problem with you posting about a shop that has given you good service...in fact, I allowed Jason to be on the forum as a non sponsor since he appeared to be helping members rather than promoting his business...however, that changed when he posted in this thread about his business and he has been asked to become a site sponsor...thread closed