Rear Led Tail Lamp rebuild
#31
NG ... You should tint the inner part of the light (not the lens) they look great, if I ever get round to it Id do mine ...
From this :-
To this :-
A lot of owners tint the whole outer lens with a dark film, personally Im not a fan of that, but yah if you like the look sort it ...
From this :-
To this :-
A lot of owners tint the whole outer lens with a dark film, personally Im not a fan of that, but yah if you like the look sort it ...
#32
@Rico.Adams I didn't have time to play with it yet... maybe I will buy a brand new one...
sadly ... hì hì
sadly ... hì hì
#33
@Rico.Adams I didn't have time to play with it yet... maybe I will buy a brand new one...
sadly ... hì hì
sadly ... hì hì
#34
@Rico.Adams I will buy a new light first before I split them a part because in here part is rare and hard to find.. I need to wait a month in order to get it..
if I break the lens.. I don't have car to drive in a month..
if I break the lens.. I don't have car to drive in a month..
#35
@Rico.Adams I will buy a new light first before I split them a part because in here part is rare and hard to find.. I need to wait a month in order to get it..
if I break the lens.. I don't have car to drive in a month..
if I break the lens.. I don't have car to drive in a month..
#36
@Rico.Adams well, there re none dealership here.. in my country has total about 40 or 50 car..
I have 2 of them ,,
I have 2 of them ,,
#37
@Rico.Adams well, there re none dealership here.. in my country has total about 40 or 50 car..
I have 2 of them ,,
I have 2 of them ,,
#38
#39
@Rico.Adams lol.. of course no.. I bought it used here actually ha ha
#40
Hello all...
after long time finding what wrong with it.. then I found out it actually soldering issue...
the Led got Hot then it burn of the solder under it...
the only way to test it is take it off.. power it.. then use your hand to press at it...
or just resolder every LED on the Big Oval board which has the turn signal and the brake light...
here is the photos...
after soldering
Before solder
cut the MESH in order to take off.. the place u cut won't hurt anything because it actually open
All LED ON
after long time finding what wrong with it.. then I found out it actually soldering issue...
the Led got Hot then it burn of the solder under it...
the only way to test it is take it off.. power it.. then use your hand to press at it...
or just resolder every LED on the Big Oval board which has the turn signal and the brake light...
here is the photos...
after soldering
Before solder
cut the MESH in order to take off.. the place u cut won't hurt anything because it actually open
All LED ON
#41
Great work! Nice job finding the seam where they come apart, will be very helpful to others in the future.
What a crazy design on the circuit board! Guess getting the curve right was accomplished by splitting the board and joining with the ribbon cable interconnects.
Sad to see those little can capacitors on the board though.
What a crazy design on the circuit board! Guess getting the curve right was accomplished by splitting the board and joining with the ribbon cable interconnects.
Sad to see those little can capacitors on the board though.
Thread
Thread Starter
Forum
Replies
Last Post
TheInfamousDrew
Automotive Parts & Accessories For Sale/Wanted
0
07-24-2017 02:53 AM