Hoovie Needs Bentley Help
#1
03-15-2024 | 05:01 PM
Thread Starter
|
Registered User
Joined: Jan 2019
Posts: 365
From: Encinitas CA
Rep Power: 20
Hoovie Needs Bentley Help
If you follow Tyler Hoover, you know he has a history with Bentley CGTs.
He has bought another one that has Johnnie The Car Ninja stumped. (might need to scroll to find the start of the issue - damn YT)
He has bought another one that has Johnnie The Car Ninja stumped. (might need to scroll to find the start of the issue - damn YT)
Last edited by Randy V; 03-15-2024 at 05:20 PM.
#2
03-15-2024 | 05:47 PM
Administrator
Joined: Jul 2014
Posts: 3,446
From: Montgomery NJ
Rep Power: 1002
@Randy V ,
Did you notice that Johnnie the Car Ninja didn't comment on how he is going to fit the module through the small hole under the Infotainment head unit area, or how he is going to remove the nut on the upper right of the module, that nut and stud is under the feeder duct coming from the HVAC suitcase, the only reason you can see the module now, is because he disassembled the front and rear consoles to remove the ducts that feed the rear, but that cross section of the dash framing and that main duct will need some cutting to gain full access to the module without removing the dash, that is what I was explaining in the other thread.
Great find though, thank you !
Johnny
Did you notice that Johnnie the Car Ninja didn't comment on how he is going to fit the module through the small hole under the Infotainment head unit area, or how he is going to remove the nut on the upper right of the module, that nut and stud is under the feeder duct coming from the HVAC suitcase, the only reason you can see the module now, is because he disassembled the front and rear consoles to remove the ducts that feed the rear, but that cross section of the dash framing and that main duct will need some cutting to gain full access to the module without removing the dash, that is what I was explaining in the other thread.
Great find though, thank you !
Johnny
Last edited by Johnny Hotspur GT; 03-15-2024 at 05:54 PM.
#3
03-22-2024 | 05:45 PM
Thread Starter
|
Registered User
Joined: Jan 2019
Posts: 365
From: Encinitas CA
Rep Power: 20
@Randy V ,
Did you notice that Johnnie the Car Ninja didn't comment on how he is going to fit the module through the small hole under the Infotainment head unit area, or how he is going to remove the nut on the upper right of the module,
Johnny
Did you notice that Johnnie the Car Ninja didn't comment on how he is going to fit the module through the small hole under the Infotainment head unit area, or how he is going to remove the nut on the upper right of the module,
Johnny
Thread
Thread Starter
Forum
Replies
Last Post